Your cart is empty.
Your cart is empty.The VViViD Armour Paint Protection Film is a self healing, chip, scratch, abrasion and chemical resistant surface coating. It is optically clear, and will install and mold to almost any shape.
Moises
2025-08-24 14:16:00
Very good price! I recently installed vinyl wrap of the same brand on my cars spoiler and now installed ppf film to make it last longer. For the stubborn corners that won't stick you can carefully use a heat gun (I personally used a hair drier) to warm the film a bit to stick.
Mike
2025-07-03 13:55:29
Happy with product. Material is pretty thick and sticks well, will have to see how it holds up but seems as it will be fine.
luke lochrie
2025-06-16 16:31:35
I bought this to put a piece across the roof of my Tacoma to keep the roof rack fairing from rubbing into the paint. It should have been an easy application, but it was not. I have 13 years in the autobody and paint industry professionally and have applied countless vinyl decals and clear stone guard protectors. You get what you pay for. This stuff was very difficult to work with and unforgiving. It us not flexible and reacts negatively to minimal heat. The surface of the ppf scratches and scuffs very easily, even with my spreader covered with a clean microfiber. I used water with a couple drops of dawn in it as I have used in the past with success, and although I was able to get all the bubbles out the edges refused to adhere, even after walking away for a bit to let dry.I ended up peeling it off.The finish of the film is splotchy, textured and not a uniform clear, it looks like rattle can clear coat to be honest (was putting it over black paint). I don't recommend this product, it's cheap and it shows. If you are putting this on something you care about and want to look good, spend a little more and get the 3M stuff the pros use.
Kevin P.
2025-05-26 18:51:32
If you have a flat or single contour surface, this will work ok. If compound curved, not so much. Hard to stretch, hard to get to tack even with tack solution. It's like there's a delay; spray it with tack and after a couple of minutes it will stick. Kind of. It really wants to be dry to stick.No airbleed channels in the adhesive so it's not doable dry.
Pete02813 Of RI
2025-05-22 11:09:47
I had a tree branch break my rear window during a storm in my car. Use this plastic to close up the window until repairs are made. Plastic worked great and stayed in placed until repairs were made. Highly recommend.
DaveCarrera4
2025-05-18 17:46:47
Compared to other commercial PPF films on the market, this one is quite thin. It came with a very sticky tape to hold the role together and left a sticky residue, so they have to be cut out or cleaned off with mineral spirits. Installed over a shiny carbon fiber part and it was difficult to get all the water bubbles out given how thin it is.
Scott H.
2025-05-13 14:57:06
Purchased to protect acrylic platform from scratches and it worked great
chris m
2025-03-13 14:33:23
For some reason I had cut a couple of B-pillars for my car & it was on a box. Since the one I had on there was a Satin version, I figure I'll switch it to this gloss.Don't know why I didn't use it, but I'm glad I only peeled the one side first. It applies easy enough on a flat panel with no curves. Not stretchy at all and it is glossy. Only thing is the orange peel is horrendous. I have never seen anything this bad before.It scratches very easy as well. Not sure if the self healing feature would even work, but I removed it after it dried because of the orange peel.If easy of applying to a flat surface, maybe white paint this is for you. Maybe even just for practice since it's inexpensive.
Buen aroma , baja duración del aroma en piel
2025-02-28 17:08:42
Tal cual se describe
Chris
2025-02-25 12:18:19
Put on the front of my enclosed trailer, good quality
Gord
2025-01-28 15:52:17
The glue/adhesive doesn`t adhere to well, to my door sill plastic, keeps coming up .....Thus it is OK for the price....?
MJD
2025-01-24 19:45:19
good durability and thickness with great shine and easy to manage during installation
Godmodeon
2025-01-20 11:21:38
I bought this for installing under bushwhacker flares so they don’t sit on the paint, the size is about right to do all 4 flares but when you install it little bits of the paper backing get stuck all the way along the edge. Down side to cheap vinyl is the paper backing but also how they cut it messes up the edge on both edges and there’s no way to clean it or pick it out so your stuck cutting both edges for a clean edge or peeling and just buying better stuff.
Recommended Products
$38.49
$ 19 .99 $19.99