Your cart is empty.
Your cart is empty.Product Description
When Do You Need to Use VXDAS TPMS ?
-
Do tire rotation, didn’t have a quick and easy way to let ECU relearn new tire information
-
New TPMS sensors installed, letting air out or adding air in to the tire couldn’t make the system recognize new sensors
-
Low tire pressure or leakage / replacement or installation of tire pressure monitoring equipment / tire replacement, sensor damage, etc. After those problems are solved, TPMS needs to be reset
-
When the tire pressure indicator light is ON, after the maintenance is performed, the tire pressure needs to be reset to turn off the TPMS light
-
Exchanging the winter tires or Summer tires
Ellio Martinez
2025-08-28 13:01:55
Is really easy to use, and work excellent for my Truck, I save $200, it was what mechanics shop was trying to charge for setup. is crazy. but for 15 bucks and youtubo video. was really easy.
Diana Hernandez
2025-07-23 16:08:30
Work on ford vehicles as advertised. No issues with it connecting to the OEM ford TPMS . Work at a Lincoln dealer and highly recommend due to the cheap price. If you just did a tire rotation and just need to retrain the TPMs. Just hit the brakes 3 times then spam the hazards until horn sounds then retrain the TPMs for fords and Lincoln.
jT
2025-06-23 18:14:51
Have contacted the company on their website multiple times and through email. No response. Tool will not complete the job.Tried to use this for the first time just recently, after doing my own tire rotation.New batterySwitch set to 'F' for FordFollowing Ford TPMS procedure:Relearn Procedure for Models WITH STANDARD IGNITION. Inflate all tires to pressure listed on vehicle placard.Turn ignition to OFF position and press and release brake pedal.Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.Press and release brake pedal.Turn ignition to OFF position.Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped).The horn will sound once each sensor has been recognized.After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.Turn ignition to the OFF position.I can never get the LR tire recognized and it always fails, giving me the error message, "Tires Not Trained - Repeat".I'd be happy to rate this higher if it worked.
Mariusz
2025-06-10 11:39:55
I have an older VXDAS EL50448, it works well, but has problems triggering TPMS sensors with worn out batteries. My 2014 Chevy Cruze is running on original sensors (batteries are 11 years old!!!) and this time on tire rotation, my old tool did not manage to force sensors to relearn... Well, time for the new tool. Ordered, came in, popped battery in and??? I was done re-registering the old sensors to the car system in... under a minute... on top of that I did not have to play around with directing the antenna to 'ideal' angle... just get it near by the sensor and done...
Sue W
2025-06-07 10:27:32
I bought an OEM (GM) TPMS and took it to my tire store to replace the defective sensor. They told me their TPMS tool could not program the new OEM sensor I bought for $30, but they could sell me their aftermarket sensor for $60 (#hmmmm). This tool successfully re-programed all of the OEM sensors. : )
Jim Wilson
2025-06-04 13:00:19
This works as it says in the instructions and it's very easy to use. I wish I would have bought one of these a long time ago.
Walter
2025-05-13 15:31:23
Three tires were calibrated. The 4th was not working. It identified the problem which for some reason seems gone for now. I rather have the tool available than not have it.
Kenneth V Clay II
2025-04-23 13:04:05
Price was good but the tool did not work.
Cristian Edgardo Reyes Hernandez
2025-03-07 18:46:02
Rápido y fácil , lo usé en una Suburban 2015 y rápidamente programo
Pat
2025-03-01 12:31:12
Simple to use, I relearned my tpm sensors in less than 2 minutes. Ideal if you’re doing a tire rotation and don’t want to bring your vehicle to a garage. Works well.
Saleh Mohamad
2025-02-26 11:48:16
It's a nice DIY tool . I managed to reset my car's TPMS without going to any workshop .
khriz
2025-02-01 14:20:17
Funciona perfecto para autos GM, lo use en un Malibú 2013 LTZ y todo bien programo correctamente los sensores TPMS.
Linda Lennon
2025-01-28 10:46:54
Easy to use to reset tire pressure sensors in my Yukon.
Recommended Products