Your cart is empty.
Your cart is empty.Product Description
Full Duplex Intercom Wireless Video Transmission System
LAIZESKE W1000S TX/RX set is a real-time wireless video transmission system integrated with intercom which enable communication between the director and the photographer as well as wireless video transmission system functions, save your time and costs to set an extra intercom system. Supports SDI and dual HDMI wirelessly transmission range in 300 meters (max 400m) with 0.08S ultra-low latency, up to 1080P/60Hz video signal provide higher quality image. Supports one transmitter to multiple receivers, the transmitter can be switched as receiver at will. OLED screen show link status, signal strength, video format, intercom mode, battery level, temperature, fan status, etc. information. Android/iOS system APP monitoring; mulitple power options. Ideal for filmmaking, sports events, wedding live broadcast, church live streaming, etc.
HDMI Format:
480P60, 576P60
720P60/59.94/50
1080P60/59.94/50/30/29.97/25/24/23.98
1080I60/59.94/50
SDI Format:
480P60, 576P60
720P60/59.94/50
1080P60/59.94/50/30/29.97/25/24/23.98
1080I60/59.94/50
Key Features:
* Dual HDMI + SDI signal interfaces, meet your different needs
* More than 1000ft transmission range with 0.08S ultra-low latency
* Up to 1080P@60Hz, provide high quality image
* Wireless full-duplex talkback, real-time intercom between the director and the photographer
* The transmitter can be switched as a receiver at will
* One TX to multiple RX, monitoring for everyone on set
* Real-time APP monitoring for Android/iOS system
* 13 frequency channels, AUTO channel scan
LAIZESKE W1000S Video Transmission System Uprade to Version 1.1.9
In order to improve user experience,we updated the W1000S to V1.1.9. The user who has purchased can update the firmware.
The Laizeske W1000S FAQ Setting Method:
Q: Connection State, the screen appears mosaic or the signal connection is unstable?
A:It means that there is a wifi signal close to the transmission frequency, you can re-select another channel.
Only the receiver is allowed to adjust the channel in the connected state, press the up and down keys to select the channel, and press the menu key in the middle to confirm the channel.
Q: Unconnection State, the transmitter and receiver cannot be connected?
A: Please turn off the transmitter and receiver, and turn them on again at the same time, press the menu button in the middle, enter the WPS mode and turn it on, then it will pair automaticly.
Notice:
1. When signal frequency is weak, please try to choose another channel with a wider frequency span. (For instance, the signal of channel 10 is weak, please choose channel 1 or 6, but not channel 9 or channel 11)
2. The poor wifi reception of the mobile phone is related to the brand and model of the mobile phone. Please try different mobile phones.
Q: Latency
A: W1000S adopts 5G wifi transmission technology, which can well avoid the influence of 2.4G signals in the environment, such as wifi signal interference caused by your household appliances, wireless mouse, etc., and has built-in up to 13 channels to ensure transmission stability and low latency.
1. However, the influence of environmental factors on the delay of wifi transmission is inevitable. We recommend that you do a wifi signal test before starting your shooting, and turn off or stay away wifi signal sources that may have an impact and select the best signal channel.
2. Please make sure your camera output setting is 1080p and 50-60fps. Other settings may affect the delay and transmission stability.
Innovation OLED Screen Design
The W1000S has a creative OLED screen so you can check out all device status and control the system with displayed information on the screen.
1080P HD Image Quality
The resolution supports 1080P60,1080i60 and under 1080P60 format, provide a higher quality image.
Bulit-in Fan, Effective Cooling
The excellent cooling design enable the device working long time in hot environment as well.
Nick Barragan
2025-08-30 16:55:16
The media could not be loaded.
Agustin Casse
2025-06-24 15:10:18
As soon as i received it, i tried with a broadcast camera that output 1080p60 and the image want fluid as i expected... so it isn't really running to 60fps... only if i switch it to 1080i ... there i you can get the smoothness that you would expect... but remember that 1080i is interlaced therefore is really a 720p60 once you can deinterlace de image loosing resolution and quality in the process. I think is misleading to offer a product that says it will run 60p to find out later that it doesn't. I hope the seller can tell me if I'm making something wrong to change my mind since i bought 3 units at once with expectations.Update. Tested in a ATEM Mini, bad idea, you won't be able to get 1080i or real 1080p60 .... I got questions, and I want answers.
Dawn S
2025-05-17 18:38:44
So after doing some extensive testing. and several emails from tech support and an RMA the Transmitters are working. The issue was an old Panasonic SDI switcher. It seems that the older SDI switcher I was using was not compatible with these devices. I've upgraded my switcher and the Transmitters work fine.
Stan Sandstrom
2025-04-02 11:06:56
The literature states that the transmitter (Tx) units can be set to function as receivers (Rx). the Tx/Rx units packaged together work fine as a matched pair. With an additional set of Tx/Rx units, I was hoping to have one Tx unit send A/V to three Rx units. After several attempts, I was unable to sync the additional units. Other manufacturers make this process much, much easier. Sent the units back for a refund almost a month ago ... still waiting. I was attracted to the HDMI loop out and the operator comms features, but I was disappointed with the level of fan noise, slow sync, and inability to add more Rx Units. My recommendation is to move on - keep shopping.
Ron Chance
2025-02-19 15:44:41
The signal doesn’t work right ! In the middle of your shoot u loose signal ! STAY AWAY
Recommended Products