Shopping Cart

Your cart is empty.

Your cart is empty.

Walfront HR390 Low Ohmmeter Milliohm Meter Milli Ohmmeter Measure Capacitance High Accuracy 0~120Ω 10pf~20000uf with 2 Clips

4.6 (1) Write Review
Free shipping on orders over $29.99

$56.60

$ 28 .99 $28.99

In Stock

About this item

  • & Capacitance Tester -- With this low ohmmeter, you can accurately and quickly measure and capacitance values
  • & Capacitance Tester -- With this low ohmmeter, you can accurately and quickly measure and capacitance values
  • Measuring Range -- The measuring range is 0.001 to 120Ω, and the capacitance measuring range is 10pf to 20000uf
  • High Accuracy Resolution -- Has a measurement resolution up to 1 mΩ, and the high accuracy will bring more convenience to your work
  • Much Easier Wiring -- Comes with 2 clips, the wiring is much easier, making it ideal for measuring very small
  • Printed Circuit Board -- Small size and light weight enable easy storage and carrying, and the Printed Circuit Board is also very


Specification:
Item Type: Low Ohmmeter
Product Material: Printed Circuit Board
Measuring Range: 0.001 ~ 120 Ω
Measurement Resolution: 1 mΩ
Measuring Capacitance Range: 10pf ~ 20000uf
Capacitance Measurement: 1pf
Working Voltage: 7~12V DC
Working Current: P1 Wiring Definition:
1. VDD: Module Power Supply Positive Pole(7V~12V)
2. Module: GND Power Supply
P3 Wiring Definition:
1. R+: Connect to measuring resistance.
2. R: Connect to measuring resistance
3. CAP: Connect to the positive electrode of the measuring capacitor.
4. GND: Connect to the negative electrode of the measuring capacitor.

Package List:
1 x Low Ohmmeter
2 x Clip

Note:
Do not use it outside the current and voltage range.

How to Use:
Key Description:
1. FUN: Switch the measured capacitance value or resistance.
2. Mes/Cal: Calibration (resistance short‑circuit measurement line calibration, capacitance open‑circuit measurement line calibration).


Russ R.
2025-02-05 16:10:15
Tested new board for reading less than one ohm. Has several decimal places. Yes can be used for lengths of wire and coils.