Your cart is empty.
Your cart is empty.WARN 20990 Premium Manual Locking Hub with Zinc Aluminum Alloy Dial, Dual Seals and 19 Splines, Chrome, 1 Pair
BFPD630
2025-08-05 15:09:40
I have had a number of trucks with these hubs on them, and they have never given me any issues. These are high quality parts with a classic design. The heavy brass dials feel solid, especially compared to old weathered plastic. The brass gets a nice patina as they age also. Warn makes a "hub fuse" that can be easily added to these also- the idea being that the cheap and easily replaceable fuse will fail before your drive line, u-joints, or axle shafts. These took less than 40 minutes to install with very basic tools- if you don't have a 7/64" allen wrench you will need one of those also.
SubaWoo08XT
2025-08-02 10:12:36
Quality hubs for my Dana 44 axle. The previous set of Warn hubs got too corroded from lack of maintenance on my part. These installed easily and work great.
Chris Clark
2025-07-04 11:13:23
75 Dana front in .... as easy as it can be to install and function is great.
Customer
2025-06-14 10:18:27
Received them as advertised. I run these in another rig and have zero complaints. Easy to work on, easy to use and strong as can be :)
Russell T
2025-06-12 10:59:02
I’ve been wanting to put these locking hubs on for a long time. They are very easy to install. You don’t even need to take the tire off. I highly recommend them. If you are looking at them do yourself a favor and pull the trigger. 1976 Chevy K10
Jeff S
2025-05-22 14:03:09
Haven’t installed this particular set in the truck yet but these are the only hubs I use and I’ve had no problems at all, plus they’re the best hubs for the money hands down!
Daniel Stewart
2025-04-29 15:56:13
I go on long offroad drives in isolated locations so when I saw these Warn hubs were made in the US, I felt confident they will perform. Unfortunately, while being advertised on Amazon as sourced from USA, they are actually made in China. While I know this is a common theme for many part manufacturers, I've not had good luck with castings, fit & finish for most things Chinese so we'll see how these perform over time but outsourcing to the lowest bidder does not instill confidence.
Clayton
2025-04-14 09:50:28
Fit great on my gm 10 bolt. 86 k5 blazer, couldnt have been happier with installation, had to remove one side to make adjustments and the outer snap ring can be tricky to get a hold of but once you do its easy! Other than that small inconvenience of removal they are good looking and bolts up easily!
MorphnSeaGull
2025-04-12 10:02:47
I bought these for my 93 F-150 4×4 with warn automatic lockers. I decided to switch to the manual lockers. Easy to in stall as I know what to do. If you are handy, they would work for you as well.Well priced out for the conversion form auto to manual lockers.
Don
2025-04-07 13:11:28
Excellent priceDelivered quickly
Daniel S.
2025-04-02 12:45:01
Excelente
Roberto A.
2024-12-28 11:28:37
Los materiales son de buena calidad, fácil de instalar, aunque uno de los candados venÃa con un detalle en el actuador, venÃa mal ajustado, lo desarmé y con un poco de paciencia lo deje en la posición correcta ( no fue necesario modificar).
Yesenia Juarez
2024-12-01 14:06:50
Se rompieron en el primer viaje a las dunas al dÃa siguiente de poder hacer el reclamo. No los recomiendo
Recommended Products
$12.69
$ 6 .99 $6.99