Your cart is empty.
Your cart is empty.DrMc
2025-09-04 10:44:28
I put this over my 8 foot pool table and it looks great and provides plenty of light.
Customer
2025-09-02 11:23:41
Got this to go above a combo dining/pool table. Fits perfectly over a 7 foot table. Modern, easy installation my husband did himself. Lights are bright. Can change bulbs to likeness.
Dustin Michael
2025-08-19 16:51:23
Light was easy to install. Does the job. Great instructions.
Mrs. J.
2025-08-17 18:26:01
Would have given 5 stars except one shade had a scratch that could be noticeable. Will fix with a marker of similar color. Other than that the light was of good quality and easy to assemble @nd install. Well pleased with product.
ladaniels
2025-07-25 19:19:22
We were not sure how this would work for us because there were no pictures of how the light mounted to the ceiling. We had a ceiling fan that was off center and we needed to hang a light over our pool table. This light was the perfect option as we were able to wire it to the existing electrical box in the ceiling and use 2 hooks to hang it where we needed it. We did need more chain, but there was enough wire (luckily). The hangers are 35 inches apart as stated in a previous review. The light is very light and there is no issue with it hanging on the hooks in the ceiling as opposed to using boxes as the directions suggest. Awesome addition to our room â¤
John D. Gardner
2025-06-04 14:56:49
My table is 8’. My ceiling is at an angle and about 12 to 15’. The electrical box (3-wire) is offset from the light, and there’s no beam where the lamp needs to be. I fabricated a 2â€x1â€x38†Mahogany beam to attach to the ceiling drywall using three screws with plastic expansion. The beam had two small eyelets spaced 35†apart. Also added sufficient length of chain to reach the slate minus one foot. Pre-Drill the three screw holes such that the screws slide freely without grabbing (middle and both ends).Step #1: Place the billiard exactly where it needs to be, then mark the true center with masking tape and a dot.Step #2: Use a string and a small weight and climb ladder to transfer the true center position of billiard to the ceiling (by hovering over with the string & weight) and mark ceiling with push pin.Step #3: Install plastic expansion in ceiling for center screw.Step #4: Install wood beam to ceiling using center screw only.Step #5: Use the string and weight method to project the orientation of wood beam unto billiard. The two eyelets of the beam must meet the centerline of the billiard. Once centered, drill pilot holes in the ceiling for the two end screws and finish installing it.
Ronald N Graham
2025-06-03 09:43:19
Shades are metal and seems to be of good build quality especially for this price point Happy with this purchase
Curtis B.
2025-05-29 12:31:27
Best packaging I have ever seen. One tiny scratch on one shade. Looks great.
Ken Hopkins
2025-05-24 18:36:04
Light came packaged well and I managed to get it up. Flicked the power on and only one of the 4 lights came on. Took it down and checked the inside wiring. One of the inside wires had come away from the connection and was half way down the tube. I managed to get it out, connect it back together and tape it. (as I sort of know what I'm doing). Anyone who wasn't familiar with wiring would have not gotten this to work. Not impressed when I spent close to $400 for it.
Andy
2025-04-28 20:48:48
Well built lights for cheaper than you’ll find in stores. Easy to install and the four shade light is perfect for an 8 foot table.
Melvin MacIntyre
2025-03-18 15:32:49
Great pool table lighting
Customer
2025-02-25 13:25:39
The light is ok but it is not for a full lenght snooker table. I need to replace it with Ikea 6 pendants... that is still cheaper and worked better.
Bob
2025-01-06 18:40:46
Easy to install nice appearance
Recommended Products