Your cart is empty.
Your cart is empty.Viner
2025-08-30 17:30:53
This review is for a set of hex-head concrete screws sold with a drill bit and driver. I used a small corded hammer-drill (not included) to drill the pilot holes in my exterior stucco wall, and then used the same drill in non-hammer mode with the included driver to drive the screws into the stucco. The combination seems to work well and is securely holding my attachment to the wall. The kit pieces were easy to use and I have more screws left over if I need to attach anything else.
David C.
2025-07-30 10:50:48
Great all in one kit worked extremely well on cement.
Customer
2025-05-05 20:04:10
I have concrete walls in the basement workshop. The drill bit and screws work great for hanging stuff like tools and shelves.
Michele M. Baumann
2025-04-22 12:36:53
We used these concrete screws to attach a hand rail we purchased on Amazon. I needed a handrail after my knee replacement. Was great to get both the correct drill bit and socket to drive into the concrete.
Tim
2025-02-04 11:32:26
Was only able to drill 4 holes in cinder blocks with the included drill bit. Even using my Dewalt drill with hammer function,the last 2 1/2 holes were a battle. I ended up going to the hardware store and buying a 5/32 Milwaukee masonry bit,and that drilled almost like I was drilling wood. So the supplied bit is crap. The screws themselves are of OK quality,but I did break the head off of one driving it with my regular Dewalt 20v drill. Also had a couple try to round off,but I’m not sure if that’s from low quality screws or if the supplied nut driver isn’t great. Anyway,it’s a good enough deal,but plan on buying a quality 5/32 bit before you even start your project.
Placeholder
2025-01-26 14:04:07
Worked very well would buy again better than most and reasonably priced
Mark R. Ambrosius
2024-12-24 16:41:40
I needed to attach something to a block knee-wall. I needed 15 holes/screws to make the connections. When I first saw the drill I thought it would break. The drill held up, made perfect holes and the screws held tight. Great product! Recommend this, highly.
G. Joy
2024-12-21 10:10:23
Had a hard time drilling the hole in the concrete initially with a regular drill and the supplied masonry bit. But then I borrowed a hammer drill and it made a huge difference. The drill bit that comes with the kit is designed to work with a hammer drill. Other than that you have to follow general guidelines for masonry screws: Tighten just the right amount and do not allow the screw to spin in place or you will ruin both the screw and the hole you just made.
Recommended Products
$48.71
$ 23 .99 $23.99
$29.99
$ 12 .99 $12.99