Your cart is empty.
Your cart is empty.Product Description
Bolt Pattern: 6x5.50
Center bore: 78.10mm
Thread Pitch: 14x1.5
Thickness: 1.50", 1.75" & 2"
6060-T6 aluminum alloy
Our spacers are made from FORGED aircraft quality 6060-T6 aluminum alloy. Each spacer is anodized black which significantly enhances the hardness and corrosion resistance.
12.9 class studs
Our wheel studs are made to SAE 12.9 standard
CNC automatic processing
Our adapters are produced using CNC lathes and milling machines. CNC ensures a precise fit to your vehicle hub eliminating possible vibration.
Installation Advice:
1. Clean the studs thoroughly and remove excess dirt, oil, grease etc.
2. Slide spacer onto the vehicle studs. The Center bore of the spacer will fit tightly onto the vehicle hub.
3. Thread the supplied lug nuts onto the studs with the TAPERED end facing the spacers. Install the nuts by hand ONLY and tighten them in a crisscross pattern with a torque wrench as per the manufacturer specifications
4. Slide the wheel onto the spacer. The wheel should fit tightly onto the adapter hub
Jeff
2025-08-25 09:27:32
Perfect match to a 2023 Sierra 1500 AT4X. This truck has stock suspension with stock wheels and tires. These 1.5†spacers put the tires outside edge just 1/2†outside the wheel wells. Looks great. Quality is good and I don’t have any complaints. Good bang for buck.
Phillip S.
2025-08-11 11:56:43
Perfect fit for my 2023 Trail Boss. Easy to install and specs were spot on. Replaced myself with a floor jack and jack stands in Less than an hour. Gave my truck the look I wanted without the need to purchase new offset rims. An inexpensive option to widen the stance on a vehicle. Very little impact on performance of the truck. The 1.75†pushes the tires a bit outside the wheel well. Any less I think would’ve been too little. Any more and I’d be concerned with the added stress on my suspension.
Kentucky
2025-06-23 15:33:38
Had a 6 in lift installed with 20 inch rims and 35 inch tires. Looked great, but front poke was larger than rear. This is normal when lifting Chevy trucks. So I added these (1.5 in spacers) to my rear to even it out. Look speaks for itself. Did job myself. Easy install. Have driven about 500 miles with zero issues so far. If you are on the fence, this is a no brainer.
MOONRUNNER
2025-06-19 10:51:38
Seems very solid, but I did not like the feel or short length of the lug nuts that came with it so I replaced them with something better. 1k miles l on these spacers so far and no issues... aaaand truck looks much better with the wheel wells filled out.
Joel
2025-06-05 14:29:19
Fit great on my 2006 Silverado Crew Cab!
Don Gardnier
2025-06-02 16:37:41
Install these with no issue. Tires poke out about 1 in. Not real aggressive like you see on some vehicles but it is definitely much nicer looking than the stock. I believe that I had the 1 and 3/4 in spacers
Customer
2025-03-27 18:36:26
These were easy to put on just simply makes factory wheels look better. They are just outside the fenders now which is a better look.
Carlos Omar
2025-03-11 16:13:53
Son espaciadores de buena calidad y llevan centradores lo que los hace un artÃculo seguro, solo un detalle que al momento de instalaros quedaron muy bien en la masa de rueda pero el centrador algo justos con el rin, tuve que meter lor rines algo forzados qué por ser de aluminio dieron de si.... peri siento que deberÃan de venir un poco mas a la medida sin forzar el rin.
David centeno valdez
2025-03-08 14:48:05
t is a very good quality product, it fits perfectly and the most important thing is that there was no significant change in the driving of the vehicle, I highly recommend
BF
2025-01-31 14:22:58
Good quality product, comes exactly as it’s listed. The hub centric is perfect, don’t be discouraged if they’re tight going on
Owen Zhao
2025-01-04 18:01:23
It fit good to my Silverado 2022
Steven
2024-12-18 16:48:42
I have these on the back of my 2016 Silverado. They've been on for about three weeks now. They fit great.
Recommended Products