Your cart is empty.
Your cart is empty.Product Description
Universal Windshield Washer Nozzle Fluid Hose Kit, Suitable for Most Car Windshield Washer Nozzle, Connect Car Water Pump with Windshield Nozzle
I Type windshield wiper hose connector
Three shapes (T-type, Y-type, I-type) of connectors are available to meet the needs of different cars
Y Type windshield wiper hose connector
Windshield washer fluid hoses that are long enough (4 meters long) to be cut as needed
T Type windshield wiper hose connector
The hose is easy to cut and install, and the connectors are simple to attach. No special tools are required
Butch Simmz
2025-07-22 16:10:41
My washer nozzles weren't spraying any fluid onto the windshield when I pushed the lever on my steering column so I purchased this kit. After removing the hood insulator I saw that one of the plastic connectors linking the hose sections together had disintegrated rendering the entire system inoperative. I used a straight connector from the kit provided, and linked the two sections of hose together. I clipped about a quarter inch of brittle and flared out old hose from each end to ensure a tighter more secure, and leakproof fit. Luckily, the new connector was of a sufficient length that the two shortened hose ends could be pushed onto the flared ends of the new connector without any other modifications. I tested it and the system is now functioning perfectly. This procedure necessitated that the eight plastic clip/rivets securing the hood insulator to the vehicle be replaced, as they all broke when I pried them out of their holes. It is advisable to have a fresh package of these at the ready as the old ones are very likely not reusable. (each make of vehicle is likely different so check your fastener part numbers) I determined the part number for these fasteners and ordered a generic replacement that worked perfectly. I was able to purchase a package of 100 for $12.00, less money than the dealership would have charged for the 8 that were required for my vehicle! The total cost to repair thus was about $20 probably one tenth of what the dealership would have charged. The time required for the procedure was less than 30 minutes including removing/replacing the hood insulator and the hose repair itself. Another successful DIY endeavor!
Louis Obregon
2025-07-04 11:53:32
worked as described
R. Boyd
2025-06-29 11:24:01
I was able to get the new tube to fit over the existing tube with the help of a shot of silicon spray.Works fine.
redbluejay777
2025-06-20 14:19:43
Easy to install, worked as described to replace cracked line.
Gerald S.
2025-04-27 18:26:17
This kit is good quality. Good rubber tube, and many connectors. Worked for me.
cg
2025-04-24 16:16:14
I needed replacement hoses since my OEM ones were chewed through by rodents. This replacement hose seems to be OEM quality and fit my existing connectors perfectly. I also now have more than enough extra if this happens again.
skidoogirl
2025-04-04 13:16:56
Ended up not using this, but us good to have around
Dura muy poco
2025-03-01 09:11:28
Las mangueras son buenas, lo malo es que los conectores de plástico son de baja calidad y se rompen fácil.
Edmundo
2025-02-07 10:40:57
Es lo que necesitaba y llego a tiempo ðŸ‘
Hyucksun Kwon
2025-01-28 11:57:50
installed to my car and no leakage.
Nonizi
2025-01-11 20:13:07
The items was as described, thanks
Lee
2024-12-19 15:25:30
It came quick and was exactly as described,
Andrew Macadam
2024-11-13 13:13:02
Very happy with it easy to install.
Recommended Products