Your cart is empty.
Your cart is empty.The 2-piece Element 24" Counter Stool Set, crafted in a Natural finish, boasts simplicity of Spruce up your kitchen, breakfast nook, or den with this Winsome Element Counter Stool Set. Finished in a polished clear lacquer to highlight the natural wood grain, giving these classic stools a blend of modern and traditional design. They feature a more conservative foot print than many other flared-leg stools which give them a streamlined, contemporary look and allow them to be tucked neatly underneath a counter or table. At nearly 24" high these stools have a static weight of 220lbs. Crafted of solid wood, these stools have both high and low crossbars on all sides which provides stability while also serving as convenient footrests. The round seat is 12" in diameter, offering a generous seating area. The 2-piece set conveniently ships in one box that includes the hardware needed for assembly. Replacement part request can be submitted directly to the manufacturer within 60 days from date of purchase. Overall size: 13.39" x 13.39" x 23.86"H Weight capacity 220 lbs. Ships in 1 box
smiley
2025-08-26 11:10:02
These stools are easy to assemble. They are sturdy and comfortable. Love the color and weight. They're great value for money. Had no difficulty with the screw quality as some complained about. Functional and attractive.
LisaAnn
2025-08-21 17:21:36
These are easily put together, look perfect under my counter and hold up well. I think it was a great value for my needs
nwagh76
2025-07-09 16:26:09
So, these are not hard to assemble, but there are a few tricks that make it FAR easier.1. Get a hex driver bit for your power screwdriver. The included hex wrench is very hard on the hands to get the screws tight. It is metric, so be sure to get the right bit. That "freight" company near the "harbor" has cheap bit sets that will do the job.2. Speaking of tight screws, if you try to tighten them all the way down you will strip the head of the supplied screw. Pre-drill the hole an extra 1/2" with an 11/32" drill. They will still tighten but without destroying the screw.3. If you can get Robertson (square head) screws, use them to attach the seat instead of the Phillips head screws they supply. Use #8 x 1.5" flat head screws. You can use the supplied screws, but be careful to not strip the heads. Square head screws are superior to any other type. Trust me.4. The wood plugs fit just fine, contrary to some other reviews. But, put a little wood glue around the sides of the hole first, then tap in flush with a rubber mallet. Not too much glue, you don't want the glue to squirt out on the finish.5. And by the way, seating the crossbars is far easier and more reliable with a rubber mallet.Do not assume the stools will be totally level. They are not. They rock a bit. Not bad, but noticeable. If you are a gluten for punishment you could sand down 1 or 2 leg ends a bit to level them, but applying some soft feet is a better option. My stools will be used in a theatrical setting so the slight rocking is not an issue. Any stick-on feet will not last in our environment, but should be OK in a home bar.The stools are quite nice for the price. Not super quality, but not a C note each either. Make sure you get all screws tight. If I was doing these again I'd put some wood glue into the bottom (longer) crossbar holes before screwing them together. The top crossbars should not be glued because they will allow the stool to flex a bit and self-level (as much as they do). For my purposes I would buy these again. For a nice home bar, perhaps something nicer would be better. I don't have a home bar, so the point is moot. Hope these tips help you!
PerryV
2025-07-02 12:36:16
Assembly including opening the box and laying out all the pieces, 30 minutes. I fitted all the pieces together. Then I added the screws.Nice looking stool. Nicely finished. Easiest furniture assembly I have ever done.
Kindle Customer
2025-07-01 11:26:13
We got these to go with an island and they are great. They are sturdy well made and look great. They fit great in the space. They don't hurt to sit on. They work great. The wood is a little soft and has gotten a little nicked up but we have had them a long time and are hard on them and they still look and work great.
mara
2025-06-25 18:55:40
They were easy to assemble but soon became wobbly. My husband is constantly tightening the screws on the legs and they continue to wobble.
Joseph Van Gyzen
2025-05-03 15:45:11
Comes to you in a surprisingly small cartoon. You must assemble the stools yourself. Very easy to do! I assembled four stools in only an hour. I always use a wood glue with all of these projects. So glue all the joints as you assemble them and they’ll last for many years. Wipe off excess glue with a damp towel and set the stools on a level surface to dry overnight. Done! You just assembled a quality barstool that will look good at your next gathering
Nany
2025-04-14 11:10:34
Beautiful and to easy assemble
SpaZioMilano
2025-04-05 15:30:41
J’étais septique mais après un mois d’utilisation c’est juste parfait
Anonymous
2025-03-21 17:21:49
These stools were easy to assemble, extremely sturdy and well worth the price. They arrived early, were packaged extremely well. Very pleased with the quality.
Carl
2025-03-01 17:11:05
Great price for two stools.Easy to put together and look great!Sturdy and screws are not coming loose after months of use.
Horizon
2025-01-26 21:17:25
The media could not be loaded.
Steve Schwartz
2024-11-16 15:57:30
Sturdy 24" counter stools.Easy to assemble and not wobbly at all. Good price, good quality. Great buy.
Recommended Products
