Your cart is empty.
Your cart is empty.Product Description
NO More Wires for connecting your Rear Surround Speakers with A/V Receiver
Elegant White, Light Weight Design
About WSA-5RP
Tired of running cables around doors or hiding under carpet to connect your rear surround speakers and subwoofer to the receiver? Or having limited options on rear surround speakers and subwoofer placement due to cable length and component location?
The WSA-5RP providing premium-quality audio for stereo audio applications operating in the 5.2G/5.8GHz bands with 2 x 50W low-hear class D amplifier built-in. Simply connect the transmitter module to you're A/V processor and the receiver to your passive bookshelf / rear surround sound speakers and powered/active subwoofer
[Lossless Audio & low Interference] latest wireless audio technology that supports 5.2 & 5.8GHz dual-band selectable digital wireless with an advanced total 106 RF channel auto selection, to avoid the WiFi interference with your 5G network, for near lossless audio and provides excellent transmission stability
[Easy Connection with A/V Receiver System] comes with Speaker Line Level Input and Stereo RCA Input that can receive full band audio from any audio amplifier, A/V receiver or preamp.
[High Efficiency Amplifier Built-In] 2 x 50W RMS @ 4 ohms load Class D amplifier, allow you to connects directly to any passive bookshelf or the rear surround sound loudspeakers
[An additional subwoofer connection] provides an additional subwoofer mono input and output, for connecting between AV Receiver and Power/Active Subwoofer Speaker or Subwoofer Amplifier
[Wide Transmission Range] - Up to 100 ft (30M) operational distance between transmitter and receiver (line of sight) with 24-bit 48KHz full CD quality high resolution/uncompressed audio
Connecting Diagram & Application
More about WSA-5RP
Vertical Stand included
The unit comes with a pair of clear vertical stand, allows you to store your WSA-5RP system in its upright vertical position.
Premium Gold-Plated Binding Post Speaker Output Connectors
The high quality Gold-Plated Binding Post Speaker Output Connectors, is perfect and easy for connecting any loudspeakers or the rear surround speakers in a 5.1/7.1 channel setup, can be used with bare wire – or connect the banana plugs to the end of the speaker wire.
5.2 & 5.8GHz Dual-Band Selectable
Comes with the latest dual band as 5.2 / 5.8GHz wireless technology connection with total 62 channels auto selection from RF channel 5727~5848 (Blue color LED with 5.8G mode) & 44 RF channel 5157~ 5243 (Green color LED with 5.2G mode), to avoid and decrease possibility of interference from the wireless networks routers, cell phone, garage doors, R/Cs, and other 2.4G/5G WiFi network devices.
Feature & Spec
Technical Specifications
- 5.8G Mode Radio Frequency: RF channel 5727~5848
- 5.2G Mode Radio Frequency: RF channel 5157~ 5243
- Signal-to-Noise Ratio: > 80dB
- Latency: Less than 17ms
- Total Harmonic Distortion: - 90dB
- Dimensions (W x D x H ): 175 x 100 x 32 mm
- Weight: 2.54Ib
- Receiver Amplifier Speaker Output: 2 x 50W RMS @ 4 Ohms (2 x 25W @ 8 Ohms)
Package Contents
-Transmitter x 1
-Receiver (built-in amplifier) x 1
-9V AC adapter (for transmitter) x 1
-24V AC adapter (for receiver) x 1
-6-foot speaker cable x 2 - for a pair of speakers
-Owner's Manual x 1
-Stand x 2
Krishna
2025-08-12 10:50:02
This combination of Wired transmitter and Wireless receiver unit (both units needs to be powered) works like a charm. The transmitter and the receiver does not even have to be in the direct line of sight for this to work. In my case, the receiver is hidden away between the recliners in an open empty space with no obstructions between the transmitter and the receiver and works like a charm. The best part is that the receiver comes with an in-built amplifier and a subwoofer port, which is great. I have my 2 Yamaha Surround Speakers hooked up to the powered receiver via wired connection and the Audio is crisp with zero lag. You can play with the volume/amplifier knob at the back of the receiver until the volume in your surround speakers is at the same decibels (db) as that of your wired Center, Front Left and Front Right speakers that are connected to your audio receiver head unit.I am sure I can rig a few more surround speakers to this wireless receiver unit and it should not have any performance issues. There is a setting on my Yamaha receiver head unit to accommodate additional speakers, I will just have to make sure I select that option if I hook up more speakers to this wireless receiver unit.I would highly recommend this product to anyone trying to avoid running wired connection from the audio receiver head unit to the surround speaker sets.
Steff0305
2025-08-02 21:01:49
I thought about adding surround speakers to my Master Bedroom setup for almost a year. Our 3.1 setup just wasn't cutting it. I finally pulled the trigger yesterday and, in hindsight, I should have done it a year ago. The improvement in the overall sound experience for both music and video is substantial. With our Amazon Prime subscription, the product was delivered the same day as ordered.Installation - was about as easy as it gets. It only took about 15-20 minutes overall and most of that time was moving furniture and pulling the wires. The pairing of the transmitter and receiver was automatic. The box cam with all needed accessories, including table stands for vertical alignment, which was perfect for where I was placing the units. Very simple connections.Quality - Time will tell. The construction seems ok and I have each unit plugged into surge protection. Hopefully, that will help with longevity. The transmitter only has spring connectors for the speaker wires. I would have preferred banana connectors that I use for all my speaker connections.Sound - One of the reasons for my hesitation in buying this item was the reviews mentioning occasional popping noises. During my audio calibration, I took a tip from another review that said to turn the volume knob to "High" and let the receiver handle the level. It worked well. The volume level is about perfect and, after about 6 hours of testing, there have been no pops or audio dropouts. I'm very pleased with the sound performance.Price - I think it's a little too pricey at $189.99. I'd have bought sooner if it were in the $89-$99 range. But, Since it seems to be the best product of its kind (at the moment), I don't begrudge the business strategy.Overall - Very pleased so far and giving 5 stars. If anything changes I'll update.John
M. Chase Masters
2025-06-06 15:24:03
My house had to have a wireless solution for my receiver's surround speakers. First, I tried the Amphony Wireless Speaker Kit. They worked, but they eventually created hiss sounds and one receiver failed completely. So then I discovered thatYamaha's Musiccast is not only like Sonos for room speakers, it also natively supports wireless surround on many Yamaha receiver models. On paper, Musiccast looks great. But in practice, I had constant popping sounds and drop-outs. If the surround channel wasn't playing, it was awful. I spent hours trying everything and even had Yamaha technical support trying to help me. I gave up, especially after reading about these Dynasty's.Other reviews were saying "no hiss", "works out of the box", etc. And they are right. I connected this up to my Polk SE10 satellites and it works flawlessly. And yes, NO hiss! Superb, reliable connection. You hear only the audio. No hiss or popping. The amp is good. Not great, but using a 100 watt maximum 8 ohm speaker, the Dynasty provides more than enough volume for my side surrounds.Finally, a working solution!Tomorrow I will update because I am going to install rear surrounds with another Dynasty unit to the same receiver!Also, my Dynasty did not come with RCA cables for the receiver's pre-outs. Only regular speaker wire. So if you want to connect your transmitter to your receiver's preouts you'll need to provide your own male to male RCA cables.7/15/2024 - I bought a 2nd set for rear surrounds, and they also work flawlessly. Right out of the box with the regular surrounds. No adjustments needed. They work great!
Zach
2025-05-29 15:51:52
I previously owned a Rocketfish kit and was looking to upgrade my rear-surrounds with my juice and a sub connect. The rear surround kit by Dynasty Proaudio is incredible. No connection issues whatsoever even when not line of sight. Latency levels are extremely low which makes the listening experience much better.
Darren A Peck
2025-04-27 12:29:01
I used the transmitter and amp to power a pair of rear surround speakers. Connected easily and has been working flawlessly for a week.
Alan Smith
2025-04-22 11:28:36
I’m so glad that I purchased the DYNASTY PROAUDIO WSA-5RP Wireless Surround Sound Rear Speakers Kit.It works very well.I have a 5.1 surround sound system and I would have had to lay a lot of speaker cable.I connected both my rear surround sound speakers to this. It saved me a lot of time.I placed this on a floating shelf because it works better with a straight line of sight.Great sound! I’m glad I bought this.
SMoore
2025-03-04 15:21:10
Easy to set up. If you are using bare speaker wires to connect speakers to the receiver unit make sure you put them through the holes in the posts to get a good connection.Very happy with this purchase. Much better than the JBL WEM 1 it replaced.
Alton
2025-02-05 12:02:52
Works as advertised happy with purchase
Dominic Tantalo
2025-01-18 10:02:18
This is just amazing! Super easy to set up and works amazingly! The only draw back is that even with the system on standby the speakers still hum. I was informed this is an issue I wouldn't have. But they are very good
Recommended Products
$114.88
$ 46 .99 $46.99
$189.88
$ 82 .99 $82.99