Your cart is empty.
Your cart is empty.Product Description
This HVAC hose is good for testing or repairing, such as home or HVAC air conditioner, ductless mini-split AC systems, refrigerator, refrigeration charging, vacuum pump, Pressure gauge, and so on.
Both ends of each hose are equipped with 1/4 inch SEA Thread, Iron with copper plating female connectors, one side is straight and the other has a 45 degree bend for easy access to the service ports.
Total Length: 60 Inch/1.5 M; Thread Size: 1/4 SAE; Up to 500PSI work pressure & 2500PSI burst test pressure.
Strong & Special six-sided crimp style provides a secure, stable & reliable connection between the hose and barb - even at maximum pressure.
Patrick
2025-07-27 11:20:59
This hose performs as expected. Both ends of the hose are the same size, small R-12 R-134a with a Shrader valve activator on one end. Yellow color indicates charging hose. Fits right onto both of my line-sets with no leaks.
Donald Lane
2025-07-05 18:22:08
I needed a hose to connect my vacuum gauge to my vacuum pump, so I thought I would give this one a try. Excellent choice. This hose is well made out of good quality materials. Fit and finish are excellent. Has standard 1/4" SAE flare fittings on both ends. One end contains a valve, which may or may not be needed for your particular application. Works well. Highly recommend. 5 stars.
SST316
2025-05-02 15:26:15
This hose is rated for 800psi working pressure so it’s good for r410a. It looks okay, but the fittings are not very good. By that I mean that they are a narrow diameter and don’t provide much of a gripping surface. The threads are also a little rough and do not go on to my other fittings very easily. With the subpar fittings I don’t think I am going to be using this on liquid HVAC lines. With the addition of a low loss fitting it would probably work fine.I did a vacuum test since I find that to be a good indicator of quality. It did okay in vacuum, holding a 400 micron vacuum for 30 minutes. So, in conclusion this hose works but it is not easy to attach so I give it 4 stars.
Walter F
2025-04-25 14:49:28
Received a badly rusted up hose in a bag of water that looks like it had been used.
Brandon
2025-04-14 13:38:14
This 60" hose is a handy size to attach to a nitrogen tank regulator for purging AC systems. It has proper flares and seals tightly on fittings. It does not leak. Since it is a single hose, I can have a dedicated nitrogen hose and not have to pull one from my manifold/gauge set. So far, it's held up for five automotive HVAC repairs and looks to last quite a while in occasional use.
Mark Perrenoud
2025-01-07 11:14:14
So, immediate disclaimer, I am not using this for refrigeration.I have confetti cannons that use this exact hose as their air line to fill their tanks, and one of the included ones broke.So I got this one here to replace it, and it works fine.Now, I am only putting about 150psi of air through it, so way below it's rating.But for my purposes, this hose works fine.
Weekend warrior
2024-11-26 18:09:10
This hose has quality fittings to attach to your a/c unit as well as the fill container! The hose is flexible and also feels thick enough to have a high burst strength… it has 800 psi max printed on it and it seems to easily be that strong. Great find!
Joe
2024-11-23 18:41:03
This is a very basic charging / test hose. Light weight and skinny... It has no manufacturers marks or date that I could see. It is marked 4000 psi burst pressure and 800 psi working pressure and that it's compatible with R410a. It has 1/4" SAE Female Flare fittings on both ends. One end includes a valve depressor, one end does not.
Recommended Products
$128.98
$ 62 .99 $62.99