Your cart is empty.
Your cart is empty.Product Description
WWZMDiB Wholesale Business:
- WWZMDiB Have long been engaged in the wholesale and retail business of electronic related products. Welcome letter to discuss wholesale business. The larger the amount, the better the discount.
HC-SR04 Ultrasonic Sensor
- HC-SR04 Ultrasonic Sensor is a device that can measure the distance to an object by using sound waves. It measures distance by sending out a sound wave at a specific frequency and listening for that sound wave to bounce back. By recording the elapsed time between the sound wave being generated and the sound wave bouncing back, it is possible to calculate the distance between the sonar sensor and the object.
Technical Specification
- Power Supply :+5V DC
- Quiescent Current : 3mA
- Working Current: < 5mA
- Effectual Angle: <15°
- Ranging Distance : 2cm - 450 cm
- Resolution : 0.3 cm
- Measuring Angle: 30 degree
- Note: The module should be inserted Fortunately, the circuit board re-energized, and avoid the high malfunction, if they have re-energized before they solve.
HC-SR04 Themodule works
- IO trigger ranging to at least 10us high signal;
- Module automatically sends eight 40kHz square wave, automatically detect whether a signal return;
- The signal to return, a high IO output, high duration of
- Test distance = ((Duration of high level)*(Sonic :340m/s))/2
Josh Curfman
2025-04-10 17:18:44
So far, this sensor has been about what I expected. Produces okay results within its operational range, and not hard to get up and running- just don’t expect pin-point accuracy.So far, it appears that the minimum distance it can measure is roughly 7.5 inches- closer than that, and it looks like the echo resolves too fast?Other concern is that the sensor I received appears to have maybe been pushed in on one side? It hasn’t been a show stopper yet, but there is evidence that the detection region is off center.All told, competent sensor as long as you go in aware of the potential limitations.
Olga Lebedeva
2025-01-20 13:35:42
Descriptoin states that working voltage is DC 3-5.5V. In fact it does not work with 3.3V.
Recommended Products