Your cart is empty.
Your cart is empty.Product Description
The remote control produced by our company is suitable for electric winches of 2000 Ibs and above, and can replace the handle to control the winches. Press the IN button of the remote control to retract the rope, release the button to stop the winch; press the OUT button of the remote control to release the rope, release the button to stop the winch
To pair
1. Press the "IN" and "OUT" keys on the transmitter at the same time on state, and the indicator light will flash slowly.
2. Power on the receiver when the indicator light of the transmitter is flashing,and starts the pairing operation. If the receiver moves once, it means that the pairing is successful;
3. Power on the receiver again, and use thetransmitter to control the receiver to work to verify whether the pairing is successful. If itcannot be operated,the pairing process can be repeated.
Rocky Rary
2025-07-21 17:18:31
Very quick and easy install, fit right into my winch cover. Works great as well.
Mark
2025-06-02 18:22:39
I adapted this remote to my dump trailer. It adapted real easy and works great. Easy to install and came with an extra remote. I am glad I purchased this item.
Deplorable Redneck
2025-04-20 14:50:47
I installed this on a 2022 cfmoto zforce 800 trail. I broke into the vehicle side of the wired remote harness. Used some test leads to do a test connection, figured out which wires needed to connect to the vehicle wiring. The receiver is wired hot so it will be on continuously. I did not test the current draw, wish I would've. But, it can't be much and the cfmoto needs a battery tender connected all the time anyway. If I find it to be too high I'll wire in a disconnect. The remotes use 2 aaa batteries and have a power on/off button. Also, the remote will automatically power off after 2 min 30 seconds. I did wire it so that the wired remote is usable. Very happy with this purchase.
Derrick
2025-04-09 18:09:07
Good quality at a good price. Easy to install and works great!
-Andrew
2025-04-01 14:30:54
I installed a HF Badlands 2500 winch on my ATV only to find the remote didn't work. I've had the winch for several years so there was no returning it (plus I didn't want to unmount it!). Bought this based on a couple of YouTube reviews and was not disappointed. The box is a direct replacement for the receiver that is INSIDE the original control box - I didn't realize that at first - the instructions weren't exactly clear about that. Super easy to remove the old one and put this in. Works perfectly, having two remotes is an improvement over the original single remote that came with the winch.
why
2025-02-03 16:24:39
This is the 3rd version of a wireless controller for my anchor winch. 1 worked for a couple trips and the last 2 only worked a couple time right after installation. Save your money a day buy one that is hard wired
Craig F
2025-01-14 11:10:45
Bought this for an old Warn winch so I didn’t have to fight with a cord. Installation was a breeze and worked great, even from inside the Jeep. I know most winches have remotes now, but a great upgrade for your old winch to get away from the cord. Also has a magnet so you can stick it to anything steel inside your rig to store it when not in use.
Troy P.
2024-12-27 13:00:19
So far so good for my can am defender xmr. Easy install, instructions weren't great but easy enough to figure out
Recommended Products
$185.00
$ 84 .99 $84.99