Shopping Cart

Your cart is empty.

Your cart is empty.

XGecu T76 Programmer 18 Adapters T56 Tl866ii T48 Programmer Replacement Support Eprom ISP IC Chip PIC NAND Flash EMMC GALCPLD VGA BGA Socket

4.3 (1) Write Review
Free shipping on orders over $29.99

$328.00

$ 99 .00 $99.00

In Stock

About this item

  • Please Note:Before buying, make sure the chip models you want to program are in the support list. Please contact us for checking. T56 programmer is stop produced, T76 is the updated version of T56
  • T76 features: high-performance 32-bit RISC-V MCU + FPGA controller, paired with a high-speed USB 3.0 Type-C interface. This configuration provides data transfer speeds up to 140MB/sec (EMMC 5.1 actual transfer rate), multiple times faster than traditional programmers! Whether you are reading or writing data, you will experience lightning-fast operation. EMMC 5.1 actual transfer rate up to 140MB/sec (8.4GB/minute).SPI NAND read speed up to 18MB/s.64 Gb P-NAND read speed of 30MB/S.
  • T76 supports:26, 27, 28, 29, 37, 39, 49, 50 series parallel ROM, EPROM, EEPROM;24, 25, 35, 45, 85, 93, 95 series serial EEPROM; P-NAND FLASH, customizable to add new chip models;SPI NAND (SD NAND/SD cards); EMMC/EMCP;microcontroller series programming;GAL/CPLD programmable logic device programming;VGA tool and VGA ISP programming;SRAM chip testing;High-performance 54/74F/LS/HC CMOS4000 series IC logic test. common EEPROM, EPROM, FLASH chips,support robust microcontroller and programmable logic device (GAL/CPLD) and with the capability to customize and add new chip models. the chip models will be updated normally in the future.
  • Adapter Quality: Most of our adapters are use gold-plated pin header,Better contact between the adapter and the programmer: The adapter uses high-quality spring-loaded sockets, which have strong resilience, can better read and write chips and have a long service life.
  • Package include:1*T76 programmer,1*usb cable,1*TSOP56 adapter, 1*TSOP48 adapter, 1*sop44 adapter,1*sop28 adapter,1*tssop28 adapter,1*sop20 adapter,1*sop8 200mil adapter,1*sop8 150mil adapter,1*sop16 150mil adapter, 1*plcc44 adapter,,1*plcc32 adapter, 1*plcc28 adapter,1*plcc20 adapter, 1*sop8/16 adapter,1*KB9012 board,1*QFP32-100PIN board,1*QFN32 board,1*qfn8 5*6/6*8 board, sop8 clip, 1*plcc extrator,2*pin header


XGecu T76 programmer IO design:Adopts a high-quality USB 3.0 Type-C aluminum gray braided cable for stable and reliable signal transmission.VCC voltage adjustable from 1.2V to 6.5V (64-level adjustable), and VPP voltage adjustable from 6.5V to 25V (64-level adjustable).IO communication signal voltage adjustable from 1.2V to 3.6V (64-level adjustable).VCC current limit adjustable from 120mA to 450mA, VPP current limit at 150mA, both with overcurrent protection.Supports 5V


Summit
2024-12-26 11:36:38
Nice product. I paid the premium from this seller and got the nice clips for it, and the whole product is solid. Thanks!