Your cart is empty.
Your cart is empty.Product Description
Alex H
2025-08-29 14:19:01
Easy to install, no issues, perfect.
Bill S
2025-08-16 17:06:36
The product is great but Jeep didn’t make it easy to swap the lights out do your research check out you tube it will save you lots of frustration
Matt
2025-08-06 13:54:45
I own a 2017 Wrangler JKU Big Bear. Ever since I bought it, I have hated that everything is blacked out on it except for the marker lights, antenna and door lock cylinders! Well this fixes one of those problems - now I need to decide on an antenna and paint those locks! Easy to install - make sure that you remove BOTH of the plastic rivets to give yourself enough flex of the outer fender to get the new light assemblies in. It also helps to remove the bulb holder when removing the factory light. Oh yeah, there is a left and a right light - they are marked on the back and they don't interchange!
A
2025-08-02 15:21:34
The plastic gets pretty ugly (yellows) after 2-3 years so expect to change them out, first picture is a new one vs 2-3 year old onesAlso a tip when installing, the wire that is zip tied under the fender can be pulled tword the light (slide the wire while zip tied) to be able to plug into the side marker light without having to expose the wiring from the side marker lightUpdate: the seller reached out to me and offered a refund which is nice of them, I already installed a second pair of them since I do like the product a lot and if these end up lasting longer ill update my review once more
Osvaldo Rafael Novoa Arroyo
2025-07-31 12:43:15
Quedaron muy bien
Customer
2025-07-27 12:39:53
The brackets fit nicely although the electrical light connections seem a little loose. They did take a bit of work to install, about one hour and I had to replace the fender push pins with new ones.
P Lo
2025-07-17 18:59:22
For those saying they were difficult to install, you need to remove two fender rivets and loosen one of the brackets supporting the front of the fender. Old comes out and new goes in easy.
Russell
2025-07-11 16:55:43
Another reveiw says this same thing, the Wire harness plugs are not right, the plug is made to go one way and these are made backwards and do not fit into existing harness. Will need to modify wires to use. FIX IT OR STOP SELLING.
Medic1967
2025-06-17 13:46:43
These little guys were just the ticket. My OEM fender clearance lights were shot due to water damage. Replacement light sockets were way more - plus no guarantee that the problem would not recur. Installation was not too difficult - about 30 minutes total. An extra set of hands to steady the fender as you drive the pins out of the body clips to separate the inner fender may help you. Also, the original light units may be snug and need some subtle "convincing" to release. Be careful not to break the bottom tabs. Clean any corrosion on the vehicle-side wiring and be careful when replacing the wires into the new LED units (you'll see what I mean). These things are bright and look sharp - day or night. Very happy with the purchase. The front turn signal units are next on my radar!
CARLOS BANDA
2025-06-12 19:01:50
Muy buen producto lo recomiendo ampliamente aluzan demasiado bien
Blair Kelsie
2025-06-02 16:52:03
Someone backed into my fender and broke one of my existing LED marker lights. I have other Xprite products so I took a chance and purchased these. Glad I did! They look great!Yes, they do take a bit of work to install but compared to other modifications I've done to my Jeep, they weren't overly difficult to get into place.Be careful when removing the fasteners that hold in your existing lights. If you're careful, you can reuse them just fine.
Rocky
2025-05-21 15:05:09
UPDATE: The seller read my review and reached out to me within hours. We came to an agreement that would satisfy both parties. Changing from a 3 star review to 5 stars for exceptional customer care.I purchased these because the connector on one of my OEM turn signals has rusted out and couldn't find just the connector (bulb holder part) online so I decided to give these a try. I've had the Xprite LED tail lights for 2 years and they are still working great so I decided to stick with this brand. The install was pretty easy except for one connector was being difficult. The plug was in all the way but no light. I tried the other one on the same side and it worked so I knew that it was something with this connector. I had to use a pair of channel pliers to push them together far enough to get the light working. In the end I got it working but I feel that better quality control is needed.
Alex H
2025-05-10 10:00:31
Easy to install, no issues, perfect.
Bill S
2025-04-19 17:16:15
The product is great but Jeep didn’t make it easy to swap the lights out do your research check out you tube it will save you lots of frustration
Matt
2025-04-14 21:02:04
I own a 2017 Wrangler JKU Big Bear. Ever since I bought it, I have hated that everything is blacked out on it except for the marker lights, antenna and door lock cylinders! Well this fixes one of those problems - now I need to decide on an antenna and paint those locks! Easy to install - make sure that you remove BOTH of the plastic rivets to give yourself enough flex of the outer fender to get the new light assemblies in. It also helps to remove the bulb holder when removing the factory light. Oh yeah, there is a left and a right light - they are marked on the back and they don't interchange!
A
2025-04-07 15:25:57
The plastic gets pretty ugly (yellows) after 2-3 years so expect to change them out, first picture is a new one vs 2-3 year old onesAlso a tip when installing, the wire that is zip tied under the fender can be pulled tword the light (slide the wire while zip tied) to be able to plug into the side marker light without having to expose the wiring from the side marker lightUpdate: the seller reached out to me and offered a refund which is nice of them, I already installed a second pair of them since I do like the product a lot and if these end up lasting longer ill update my review once more
Osvaldo Rafael Novoa Arroyo
2025-03-29 18:22:42
Quedaron muy bien
Customer
2025-03-22 16:14:58
The brackets fit nicely although the electrical light connections seem a little loose. They did take a bit of work to install, about one hour and I had to replace the fender push pins with new ones.
P Lo
2025-03-18 14:55:08
For those saying they were difficult to install, you need to remove two fender rivets and loosen one of the brackets supporting the front of the fender. Old comes out and new goes in easy.
Russell
2025-03-02 12:48:40
Another reveiw says this same thing, the Wire harness plugs are not right, the plug is made to go one way and these are made backwards and do not fit into existing harness. Will need to modify wires to use. FIX IT OR STOP SELLING.
Medic1967
2025-02-28 12:51:23
These little guys were just the ticket. My OEM fender clearance lights were shot due to water damage. Replacement light sockets were way more - plus no guarantee that the problem would not recur. Installation was not too difficult - about 30 minutes total. An extra set of hands to steady the fender as you drive the pins out of the body clips to separate the inner fender may help you. Also, the original light units may be snug and need some subtle "convincing" to release. Be careful not to break the bottom tabs. Clean any corrosion on the vehicle-side wiring and be careful when replacing the wires into the new LED units (you'll see what I mean). These things are bright and look sharp - day or night. Very happy with the purchase. The front turn signal units are next on my radar!
CARLOS BANDA
2025-02-26 12:06:42
Muy buen producto lo recomiendo ampliamente aluzan demasiado bien
Blair Kelsie
2025-02-07 10:00:03
Someone backed into my fender and broke one of my existing LED marker lights. I have other Xprite products so I took a chance and purchased these. Glad I did! They look great!Yes, they do take a bit of work to install but compared to other modifications I've done to my Jeep, they weren't overly difficult to get into place.Be careful when removing the fasteners that hold in your existing lights. If you're careful, you can reuse them just fine.
Rocky
2025-02-03 13:49:20
UPDATE: The seller read my review and reached out to me within hours. We came to an agreement that would satisfy both parties. Changing from a 3 star review to 5 stars for exceptional customer care.I purchased these because the connector on one of my OEM turn signals has rusted out and couldn't find just the connector (bulb holder part) online so I decided to give these a try. I've had the Xprite LED tail lights for 2 years and they are still working great so I decided to stick with this brand. The install was pretty easy except for one connector was being difficult. The plug was in all the way but no light. I tried the other one on the same side and it worked so I knew that it was something with this connector. I had to use a pair of channel pliers to push them together far enough to get the light working. In the end I got it working but I feel that better quality control is needed.
Allyn
2025-01-10 17:28:30
Very nice and good product, it gives a very beautiful look to the vehicle. For the pose, I watched videos on you tubes. It is easy, but for parking lights the plastic is fragile, but it is very tight between the wing and the false wing, that it stays in place.
Allyn
2025-01-03 13:05:38
Very nice and good product, it gives a very beautiful look to the vehicle. For the pose, I watched videos on you tubes. It is easy, but for parking lights the plastic is fragile, but it is very tight between the wing and the false wing, that it stays in place.
Recommended Products