Your cart is empty.
Your cart is empty.Product Description
Add this multipurpose weight plate storage rack to your home gym essential list! It helps you store and organize your 2” Olympic weights and Olympic barbells vertically, sparing you much floor space and also preventing tripping hazards.
Product Details
2-IN-1 Plate & Bar Storage: This weight plate storage rack features 6 plate storage pegs (3 on each side) that can accommodate 2.5 lb. through 45 lb. 2” Olympic weights plates. Better yet, there are 2 Olympic barbell holders on the base for convenient storage.
Safe & Secure: The capped frame base ends are not only for non-slip purposes but also an effective solution to the inner oxidation of the frame. Please store relatively heavier weight plates on the lower pegs for added stability.
Space-saving Storage Solution: Featuring 6 weight plate pegs and 2 barbell bar holders, this plate tree fully utilizes the space in your room by storing the weight plates and barbell bars vertically, which also prevents tripping hazards.
Note:
1. For safety, we suggest customers use anti-skid nuts to assemble the product. This fitness equipment cannot be tightened with bare hands, and it need to use installation tools to tighten. After tightening, the product will be more stable.
2. We do not provide anti-skid nuts for this product.
Ramiro Saavedra
2025-09-06 10:48:09
Very easy to assemble. Fits Olympic size plates very well. 3 tiers for all your needs. High weight capacity and you are able to store 2 barbells on it as well. Seems study but only time will tell. So far no warping or anything like that. The base wobbles a little but for the price, it’s a steal.
Jackson F.
2025-09-01 17:44:15
Right off the bat this is a weight tree for roughly $110. Taper your expectations. Seriously. I rated this thing accordingly as well.If you are expecting anything commercial grade like (Rogue or Titan Fitness), you are not thinking logically about this at all; this is for home use for people that are not very experienced lifters and as such is not going to hold 1000lb of weight plates. I got 370lbs of bumper plates on mine and can fit even more if I wanted ,but again I'm not expecting to see this thing hold weights in the ammount that professional or elite athletes need in order to train. I personally like this tree. Yeah it wobbles -if you kick the bloody thing or somehow forgot you have a 3' diameter object that is in the middle of the floor and you walk into it but why on earth are you doing those things in the first place is a question only you and God can answer. Pro tip, put your heaviest weights at the bottom, might solve some of your issues outright and keep you from thinking the thing will tip over at the movement of you taking weights offIf you have a drill and a ratchet wrench with a 14mm bit, you can bolt this thing together with ease, if you have a 2nd ratchet around it gets even easier.The only things I have to say are a bit off is that fitting a barbell into the slots with weights on is a stretch, and the bars to hold plates on are pinned in place. Little odd but hey, I expected this thing to be foreign pig iron and an inch away from non functional. Instead I was greeted with a decent thing that is indeed functional.You can use this for alot of other stuff to, hang jump ropes, clamps, towel rack.All I am saying is that you have to look at this from a perspective of "I'm buying this because I can afford it and have it shipped for free, and that is just about it. If I could but a Rogue tree, then I would."
J.M.
2025-08-24 14:30:04
I have 2 sets of bumper plates from different manufacturers and they do not fit on this rack. I had to sand down the rack so that they would fit which is a major pain in the rear but eventually after enough sanding, the plates slide on and off fairly easily. It's very stable and easy to put together.The price point is right for the flimsy steel gauge. This is another piece of generic Chinese imported fitness equipment of which there are 400 sellers on Amazon selling the same product. I just went with this one because it was a few bucks cheaper.
Maggie Casey
2025-08-14 09:50:29
It took me three purchases to find one that could easily fit all my bumper plates. This is the updated model with some added sturdy pieces.It’s perfect for the money.I have 250+ lbs on it now, Olympic 7†bar in one side and a curl bar in the other. Buy it!
Chris E.
2025-08-13 14:19:42
This is junk. Don't buy. Assembly was easy, doesn't look bad but, doesn't fit any plates. You have to shove them on inch by inch. Getting them back off is just as difficult. Making the whole thing wobble.Just spend the extra or same amount of money for the Rogue Wall Storage Stringers and be done with it. That's what I'll be doing.
Conner
2025-07-26 12:54:12
I was initially worried regarding the mixed reviews on this product, but after assembling and using it myself, I can say it works quite well. A size 17 and 14 socket are HIGHLY recommended along with an adjustable wrench. They make assembling far easier. The plate rack is very sturdy and holds both bumper and metal plates well. If you have a home gym, this is a must have.
Nickmuzz
2025-04-26 21:44:48
Like similar reviews state, the posts are tight for bumper plates. You can put them on and off but the effort required is more than it should be. I have some steel grip plates that slide on and off easily but all my rogue bumper plates require two hand effort to push on and pull off. It is easy to put together and sturdy enough. This is about average.
David Avellanet
2025-04-23 21:19:40
Received this and put together fairly quickly (and i am not going to win a handyman award anytime soon). Taller than expected but very nice. I would suggest having a ratchet handy. And the key is definitely getting Step 3 right (getting the main rod onto the base). If done properly, this alleviates wobbling others have mentioned.Not sure I would attempt to load this up with 800+ pounds. But 3 or so pairs of 45s and lighter plates should be no issue. I feel comfortable adding 2-3Pairs of 45s and a few smaller plates to what is shown in the picture.So far, very pleased. Would recommend for the price point.
Customer
2025-04-10 12:27:40
Had the tree for about a month now and pretty impressed with it for the price. Has a slight bit of a rock to it but very minimal. It’s holding 320 of Olympic plates of mine without issue. I’d definitely buy this again.
Manda
2025-04-01 19:07:34
Little wobble, nothing that makes me concerned for the weights. Holds all sizes for Olympic weights. Worth the purchase for some gym organization.
Andrea P.
2025-03-27 17:50:02
I have 270 on it and it is wobbly but will suffice.The nuts do not go very far into the bolts which causes most of the issues. I am going to see if I can find better nuts which may help.
Justin
2025-03-25 10:11:34
This is definitely the best deal for an Olympic tree that I was able to find. It fits my bumper plates perfectly and is solid with a large base.
Jasmine
2025-02-17 14:55:09
Assembled 1 of 2 we bought, was able to put my cheaper bumper plates on but the pegs are too thick for my calibrated plates. Amazon wants to charge 75$ (Cnd) to return it. Not worth the chance you won't be able to use the product, Buy the 1 from Synergee instead.
Recommended Products
$21.99
$ 10 .99 $10.99