Your cart is empty.
Your cart is empty.Product Description
OldGuy57
2025-08-19 20:04:00
These work very well, even though I didn't know I should put a short chain from the fork to the bucket as a safety restraint. The holes are there, but that is on me not knowing. The locking bolts are easy enough to tighten by hand, and removing them is very easy too.I plan to drill drain holes in the upright portion of the fork where it attaches to the bucket, as I tend to leave these outside, and noticed they hold water. Of course that means the welding is nearly perfect, but I don't want them swollen from ice over the winter if I leave them out. I will buy these again if the need arises.
J Allison Tison
2025-08-03 18:18:10
We have just went through the hurricane Helena I used these in ways I’m sure that they were not designed for. They were absolutely great, I had two trees on them at times 15 feet long and at least 12†in circumference. I did bang them up but they are still usable. I will be purchasing another set just to have a stand by. We cleared a road with these forks and moved well over a hundred trees. If anyone is remotely thinking about purchasing them you will not be disappointed
jabre
2025-07-09 14:20:43
I purchased this to use for moving stacks of tree brush. I have a Kubota B2320. I was able to install this on the front bucket in about 10 minutes, including unboxing. It is intuitive and no instructions were necessary. First day I used it for about 2 hours hauling loads of brush and lighter, 6' logs/branches. It did the job.I did notice that in the first few runs the mounting bolts needed some additional hand torqueing. After a few times it stayed set. The one thing I would like added is the ability to add a second cross bar to use as a support.I never really pushed the load capacity or know how long it will last. It did seem sturdy. Time will tell on the longevity of the tool.
Matt West
2025-06-24 15:14:22
For the price, I didn't have high expectations. I was very pleasantly surprised by the strength and quality of what I received. While I don't think I would trust them with a 2000-pound load, they did carry 800 pounds of bagged concrete mix without a problem. I think my tractor bucket will fail before the forks do. The attachment system is well designed, easy to get tight, and it has very little flex. The adjustable cross bar actually works well, it keeps the forks from shifting and it's easy to adjust for differently spaced loads. The welds are all solid, and they use heavy steel for the forks and the connecting hardware. Overall, I got a much better product than I expected, and I wouldn't hesitate to recommend them to a friend. I definitely recommend getting the longer fork option, the short ones wouldn't have been as useful or versatile, and they are well worth the extra few dollars. I was originally planning on getting the complete quick release bucket replacement assembly, but I'm glad I decided to give these a try. I saved about $600, and they do everything I need them to. I found nothing to complain about, and I did look.
L. Shane
2025-06-10 12:36:10
fit well, very heavy ! serve the purpose but take some time to install due to the weight, exceeded my expectations for the price.
JEFF THIBODEAUX
2025-03-18 12:42:02
I really like the concept - but the 1500# rating is does not seem accurate. at least not for the set I received.These arrived on Saturday while I was moving some logs around at my home in the bucket of my compact tractor. My tractor is a small diesel. perhaps 24 HP with a loader/bucket. Directions were simple and easy to follow. The set was installed and off to work we go. grabbed a pallet and hand loaded the logs. The loader/bucket has am estimated lift capacity of 900#-1000#. not much. With the forks installed - the overall length of the loader is increased by 5 ft. greatly reducing the lift capacity. I factored all of this into my initial lift. More than likely reducing the total load by half of the capacity of the forks stated 1500# rating. After lifting and moving the pallet without any issues I attempted to straighten the pallet by pushing it on the corner with the right fork. The fork bent inward. No damage to the pallet - just the fork where the stiffener/spreader/stabilizer mounts to the fork. Really disappointed with the working capacity. Its not like this was on a skid-steer (as the advertisement suggests) - just a compact tractor moving a pallet. I am beginning to wonder if the right fork may have had a weak spot.
John House
2025-02-17 15:11:44
Have not used them yet , good price.
Samantha Small
2025-01-28 15:41:26
Great product. Works as descibed
Recommended Products
$89.99
$ 39 .99 $39.99