Your cart is empty.
Your cart is empty.This 3 bit Yonico 14323q Undersized dado router bit set will make perfectly sized dado cuts for 3 commonly used sizes of plywood; 3/4", 1/2" And 1/4". Plywood thicknesses are actually thinner than the measurement stated. These bits are slightly narrower or "under sizes" To match the actual thickness of plywood. Bits included • 13/64" W x 1/2" H dado bit for 1/4" Plywood • 31/64" W x 3/4" H dado bit for 1/2" Plywood • 23/32" W x 1" H dado bit for 3/4" Plywood bits come in a solid wood storage case. All bit shanks are 1/4".
Paul13
2025-09-04 12:25:15
Used the bit for 3/4 inch ply (which isn’t 3/4) and it worked great. recommend the bits?
Andrei S.
2025-08-22 12:00:46
I only tested the 13/64" bit and it works perfectly with a 5.2mm plywood from Home Depot. Snug fit but not too tight.
Mitchel Martin
2025-08-07 14:32:08
I have a set of expensive 1/2" shank undersized bits for my large router and router table. But sometimes I need to groove a smaller piece of wood and need to use my small Makita router because of the 5" base. These bits performed perfectly and are worth every penny. Definitely recommend...
Home user
2025-06-29 10:04:08
The 3/4†bit is too wide for the maple plywood at the orange box store. Need a 0.703†wide bit for their plywood but haven’t been able to find one that size. The piece I’m cutting a dado in is too large to cut the dado on my table saw.
Steven Gearhart
2025-06-14 11:20:39
I purchased these plywood width bits in both ¼" and ½" shanks. My experience with YONICO router bits has always been impressive. Excellent sharpness, clean cut, and nice storage. I recommend this brand.
David Honeywell
2025-06-11 12:16:11
Good
R. Carin
2025-05-09 16:52:12
Great router shanks for the money. The 3/4 (23/32) shank gave a perfect cut. Great for shelving. Strongly suggest this product to anyone looking to find accurate cuts for plywood fittings.
Phatjules
2025-05-07 18:35:30
Cut only a couple of inches in plywood and the whole cutting portion snapped off
Dan H.
2025-05-02 10:44:38
They work, not as clean as Freud or other higher quality brand but perfectly serviceable for the price.
Mr Paul chetwyn
2025-04-12 16:12:20
Very good for plywood, a bit slack depending on your plywood/supplier but not the routers fault, all in all very good.
George Wearing
2025-04-04 20:37:17
Just the the job
Jaime
2025-03-10 10:21:38
Very good quality for the price, I have used it many times on plywood and its still holding up.
farley2102
2025-02-12 18:39:30
Great bits. Nice clean cuts no burning.
Recommended Products
$20.40
$ 9 .99 $9.99