Your cart is empty.
Your cart is empty.Product Description
zonoz 35mm slide trays (Set of 3) for the zonoz FS-ONE 22MP ultra high-resolution 35mm negative film & slide converter scanner unit
- zonoz 35mm slide trays set of 3 for the zonoz FS-ONE 22MP ultra high-resolution 35mm negative film & slide converter scanner unit
- Set of 3, where each tray holds 4 slides great for speeding up the processing time.
- Manufactured to the highest quality available.
- With true enhanced performance.
- Latest technical development.
zonoz 35mm slide trays (Set of 3) for the zonoz FS-ONE
zonoz 35mm slide trays set of 3 for the zonoz FS-ONE 22MP ultra high-resolution 35mm negative film & slide converter scanner, Set of 3, where each tray holds 4 slides great for speeding up the processing time. Manufactured to the highest quality available. With true enhanced performance. Latest technical development.
Big Jack
2025-08-10 18:44:17
If you're going to be scanning a lot of slides, spend a little extra and add these 3 additional slide trays. The slowest part of scanning slides is putting them in the trays and taking them out. These streamline the process to help you get things done faster. They work great with my Zonoz scanner.
WERNER SLABBER
2025-07-11 13:46:45
Very handy if you have batches to scan. Usually 20 on a sheet so get 5 to enable you to do a page at a time to speed things up
T. Tapscott
2025-06-13 19:19:02
As mentioned by another reviewer, the trays are a little hard to open & have some rough edges on the hinge side. No problem making some modifications. Beyond that, being able to load 4 slides at a time is a real time-saver.
FromUtah
2025-05-17 15:41:43
These basically work, but the slide trays have hinges and snaps that are difficult to open and close quickly. It's hard for my fingers to get the slides out without tapping on the face of the image part of the slide, or dumping them out on the table. I'm working through about a thousand slides, this is taking too long, I rigged the setup where I can slide the slides through one at a time with the newest one pushing out the oldest one. They fall in a stack, and no hassle with the trays. I wish I could get a refund for this one, but I waited too long to try it.
Richard
2025-04-19 14:13:23
Worked perfectly.
Iamscotticus
2025-04-05 14:49:21
The locking tabs in the center and on the ends were too large and made opening very difficult. Also on two of the slide trays mould flash along the back edge of the hinge was rough and caused the trays to jam .Both problems were alleviated with sanding and smoothing with nail files.I eventually realized that using the slide adapter that came with the scanner was the best and fastest option. I learned I could push the slides through the adapter continuously.
Gonzalo Ãlvarez
2025-01-17 12:56:08
Quality’s
Caribbean Sam
2025-01-12 10:09:11
Excellent addition to the Zonoz slide copier. With several of these you can speed up production signigicantly.
Recommended Products