Shopping Cart

Your cart is empty.

Your cart is empty.

ZSHJGJR 50 Pack Archery Arrow Nock ID 6.2mm/.244' Plastic Insert Arrow Nocks Tail for DIY Hunting Shooting Arrows

Free shipping on orders over $29.99

$8.88

$ 4 .99 $4.99

In Stock

1.Color:Black


  • Made of high quality resistant plastic, very durable.
  • Used on ID 6.2mm carbon shafts,fiberglass shafts and mixed-carbon shafts
  • Press in not glued product easy to set up can change the angle rotated to fit for compound/recurve bow, longbow and traditional bow
  • Good to DIY, well visible in wood and grass; Suitable for outdoor hunting and target shooting
  • Package include 50 pieces plastic arrow nocks



Product Description

Archery Arrow Nock ID 6.2mm/.244" Plastic Insert Arrow Nocks Tail
 Archery Arrow Nock ID 6.2mm/.244"
 Archery Arrow Nock ID 6.2mm/.244"

Product Introduction

  • Made of high quality resistant plastic, very durable.
  • Used on ID 6.2mm carbon shafts,fiberglass shafts and mixed-carbon shafts
  • Press in not glued product easy to set up can change the angle rotated to fit for compound/recurve bow, longbow and traditional bow
  • Good to DIY, well visible in wood and grass; Suitable for outdoor hunting and target shooting
  • Package include 50 pieces plastic arrow nocks


Jonathan
2025-09-03 12:03:33
These are seriously a better fit in my arrows then the ones that came in them. Love the option to get brighter colors as well, better for target practice all around.
James T
2025-06-28 11:12:37
The media could not be loaded.
Carumperus
2025-05-04 17:47:53
Took a while but works well I bought this already on a different account
NJ Hunter
2025-05-01 10:01:24
The nock is sized right to prevent nock pinch.The product has been proven in the field without failure.
Coderpitt
2025-01-25 16:22:09
I use this to extract broken nocks from carbon fiber arrows. In addition, it can be used to remove pin style nocks (aluminum arrows for Genesis bows). Use a small diameter drill bit( I use 1/8") to drill out the center of the pin, then screw the tool down the center and pop out the pin. Before this tool I could only push the pin into the arrow and put the new nock on.Also, if you have a Genesis min and the arrow rest gets busted off with part of the post in it, this can be used to extract the square peg in the arrow rest. This allows you to reuse the 10-15$ arrow rest and just replace the $2 post.I've saved enough arrows with this tool to pay for it many times over.
Joseph Brown
2024-12-08 16:58:04
Fit well in my Beman arrows as well as my Eastons. Much nicer than the white ones that they replaced.
mikedeerfish
2024-12-06 18:58:23
I shoot a lot of arrows (40,000/year) so yes, I do shoot a lot of ‘robin hoods’ and need to replace a lot of nocks. These fit snugly and with a slim profile. I add a drop of fletching glue when I insert them and they never need replacement unless I smack them with other arrows. My experience? You can’t beat the quality and price.
Karl B.
2024-12-04 13:00:51
My only slight complaint is that the portion that inserts into the arrow shaft is slightly too wide (6.27mm versus indicated 6.2mm). I will remedy this with a little sanding on my lathe. As is, it takes some effort to pry it on to the shaft with the risk of the shaft splitting or the nock breaking...? The bow string fits nicely into the nock.
noel
2024-12-03 17:52:23
Great product , fits perfect, great price
Recommended Products

$13.59

$ 6 .99 $6.99

4.9
Select Option

$12.82

$ 6 .99 $6.99

5.0
Select Option

$28.43

$ 11 .99 $11.99

4.4
Select Option

$11.83

$ 5 .99 $5.99

4.6
Select Option

$16.27

$ 7 .99 $7.99

4.6
Select Option

$7.49

$ 3 .99 $3.99

4.5
Select Option