Your cart is empty.
Your cart is empty.Product Description
Package Included:
- 1 x Bag of Iron Tips
Specification:
Material: Copper
Color: Silver
Coating: Iron and (Finish)
Outer diameter: approx. 6.7mm/0.26"
Inner diameter: approx. 4.0mm/0.16"
Length: approx. 43cm/16.93"
Package weight: approx. 47g
Model: 900M-T-I
Applicable to: 936, 937, etc.
Temperature range: 200-480℃
Quantity: 10pcs/bag
To store used iron tips
Use a sponge to clean the iron tip.
Wrap it with solder.
Turn off the power and wait until they cool down.
Place the iron tip on the iron rack.
10pcs 900M-T-I Soldering Tip, Soldering Iron Tip Sharp Soldering Replacement Solder Tip Tips Station Tool 900M-T-I
Characteristics:
Made of high quality oxygen-copper, which is of fast conductivity and heat resistance up to 480℃ for durable use.
Applicable to 936, 937 soldering station and so on with its pointed end shaped like a needle is suitable for handicraft processing, for example, fit the alarm fob of a car, such as micro switch was burst from the small circuit board and the contacts for the micro switch are smaller than micro (smaller than a pinhead), or soldering in a narrow space , Revision of the tin bridge made from chip soldering. This makes soldering these delicate, tighter connections much, much easier.
If the soldering tip is used properly, its lifespan can reach over 20,000 welds.
It has the advantage of being a long Has service life and is not easy to oxidize, easy to install and use.
Customer
2025-09-01 14:12:42
Great product! Met all expectations!
PanamaCobra
2025-08-30 17:38:27
These tips do not work at all for my Yihua 936B soldering station. The inside diameter of the tip is too large for the heating element of the iron. It slides over but does not make contact. The air space in between insulates the tip and it does not get anywhere near hot enough to solder with. No matter how long you wait for it to heat up.
Howard Fidel
2025-08-16 10:14:03
The thermal conduction to the tip is inadequate to solder properly. I had to raise the iron temperature, but it was still not soldering well.
Jose Cruz
2025-07-27 18:45:03
Our Soldering iron was listed on the compatibility, but they were too small to work at all.
Self
2025-07-16 21:00:45
The tips of these hardly like to heat up at all, even turning the soldering iron heat all the way up on my Aoyue 968. Ordered other tips and they work much better. Save your money by not ordering these cheap tips.
Wyoblacks
2025-05-22 18:12:47
Softened and bent after first use. Threw the rest away.
Gerrit Bilkes
2025-05-02 11:57:36
I use these different sizes of soldering tips for electronics projects.
ALFREDO GAMEZ
2025-04-03 18:56:14
Las estoy usando en estación de soldadura BAKU601D
John Waterman
2025-02-09 18:07:53
as described, delivered on timealways good to have a spare when on a roll
P. Davis
2024-12-14 14:29:47
Sent mixed assortment with only ONE of the tips advertised to be in the pack.
B&B's BCs
2024-12-13 14:06:25
Barrel ID to large for my iron so iron is not heating as it should. I should have returned them. My fault I didn't realize that there were different IDs.
Recommended Products