Your cart is empty.
Your cart is empty.Product Description
Key Features
Sharp blade
Reinforced saw blade is made of premium steel, double-sided mechanical grinding.
Ergonomic Design
The handle is made of TPR plastic for a comfortable grip and save labor
The saw blade angle is adjustable according to your need
Cam pins
The cam pins can be twist and lock with honeycomb base to secure work for accurate cuts.
Easy to fix
The vertical corner can be placed on the edge of the table for better control
1. MEASURE AND MARK THE CUT
Measure the length of wood you need for your project. Mark it with a pencil, then draw a straight line across the board with a square.Mark the waste side with an “X”
2. PLACE THE WOOD IN THE MITER BOX
Lay the wood inside the miter box.This particular miter box comes with peg clamps to hold the board tight against the back. Line up the waste side of the cut line with the side of the slot, not right down the middle!
3. LINE THE BLADE UP WITH YOUR MARK AND CUT
Insert the saw into the slots for the angle you plan to cut. If you start sawing at full force, the blade will jump and you'll get a jagged edge at the top of the cut. Instead, run the blade lightly over the board a few times to score the surface and break those wood fibers.
4. FINISH THE CUT
Once you have a groove in the board, you can finish the cut using more effort. Don't try to force the saw down. Just let the teeth do the work!
sbhbtb
2025-09-04 13:44:43
The box is light, so best to attach/clamp to a table/bench.
College Kid
2025-07-17 13:46:55
You get what you pay for. This will not last a long time but I only needed it cutting lifeproof baseboard trim for a couple rooms so I don't need it to last forever. This is perfect if you have an entry level DIY project, but if you want something that will last, pay the extra money for a high quality set.
Kelly D Callahan
2025-06-11 13:07:08
It worked exactly as neeed
jimmyG
2025-04-15 11:13:10
I'm so sorry I bought this piece of junk.I don't make a miter box perminent. I use it at the edge of a table. It flexes , twist and doesn't cut accurately. I was so frustrated with this I broke and trashed it. Even the saw is a piece of junk. Together they're not worth the space it takes up. I was replacing a 10 year old Stanley which I'm keeping.
Gregory DeKlever
2025-03-11 12:20:47
nice to make and put stuff together but it’s VERY EASY TO CUT YOURSELF
Miles Hagestad
2024-12-28 21:31:16
Great
Marie evans
2024-12-10 18:06:08
Which some one would make better steel materials, when cutting go through box
Howard Mallory
2024-11-19 10:39:12
This item is reasonably priced and easy to use.
Recommended Products