Your cart is empty.
Your cart is empty.Product Description
Professional suppliers of tools and hardware accessories.
- Serve customers all over the world
- Providing high-quality products and timely services
Grade 5 Strut Channel Nuts - 120 Pcs
Perfect for Unistrut and other Strut Channel
The thickness of the common strut channel nuts on the market is generally 6 mm, when you need to install tighter, or greater tension, the 6 mm is not enough.
This 8mm grade 5 strut channel nuts launched by us can withstand greater tension and with greater margin.
The shape of the alternating teeth are improved, and the function of self-aligning is further improved.
- 120 Pcs, 8mm and Grade 5 - higher strength
- Thickened Galvanized Layer - better antirust
- Precise Thread - 3/8''-16 UNC
- Perfect for Unistrut Channel Struts
3/8''-16 UNC
The strut channel nuts without springs are 3/8''-16 UNC with precise thread.
Insert the channel nut
Keep the strut nut parallel to the strut channel and Insert it in.
Press and rotate
Turn the channel nut 90 degrees, when you tighten the screw, the nut completes self-aligning.
Resto_Dad
2025-08-16 12:05:45
Seems to be very reliable and durable. With 30 nuts, you'll have an ample supply. These thickened nuts provided secure fastening, ensured stability and strength. These strut channel nuts are the perfect choice for ensuring a sturdy and reliable construction. Good quality and performance.
Setesh Ra
2025-08-12 20:33:15
These are good if you need to install a small quanity of bolts on some strut channel. I needed them for some temporary solar panel mounting and they worked well for that. Material is good quality so these should last long term.
tool_nut
2025-07-21 18:08:29
All of my cameras used in the woods for 'critter monitoring' use strut for mounting. These strut nuts worked out well on the two new installs I just completed. The finish on the nuts is good and 3/8 threaded rod screwed easily into them.I would buy again.
Gonzo
2025-06-13 13:14:12
These strut channel (aka, unistrut) nuts do the job, but they're not quite as nice as the store-bought ones, despite being advertised as thicker and better than the alternatives. The holes are well machined for 3/8-16 bolts or all-thread. They do measure the exact 8.00mm claimed, but my name brand ones are 9.66mm. Width is a consistent 34.32mm for either. The old ones have a little better defined and manufactured corner(s) curve for rotating them into the channel (as opposed to sliding them in from an accessible end), although they're all a bit crude in that respect.The biggest issue is, the new ones have significantly shallower and narrower grooves for sitting on the channel's rails. They still function fine, it just means you need to be more careful while tightening them down, as they can much more easily hop the rails.I added a photo of a store-bought channel nut (back) vs these generic ones (front), highlighting the above differences.
Phil
2025-02-07 15:28:27
These strut nuts are well-made of good quality material. I see no machining flaws or other problems. They fit standard strut and 3/8" threaded rod perfectly. Easy to drop into the strut mid-channel, and lock into place by tightening.These nuts are also much thicker than most others I've used, which creates more thread contact -- for a more secure connection.
L. Katzenberger
2025-01-09 14:42:17
These are as good as the ones I have purchase through wholesale companies that sell name brand Strut.
DNG
2024-12-31 10:33:01
So, of course these work for your traditional strut channel construction and they work well. The relief cut on one corner allows them to swing into place when tightening and narrow enough to remove through the opening on your channel. However, they are also useful for lots of other applications. The nuts are 3/4 wide, and fit many miter slots and other channels on tools. This size nut fits into many channels on xy slide vises and other channels meant to hold material down on to the surface. They also fit into 2x2 aluminum extrusion with a tiny bit of grinding on the surface to reduce the thickness a bit. Anyhow, great product with many uses.
Raymond
2024-12-20 10:54:20
This works as it should and are great for shallow strut. It comes with plenty.
Recommended Products