Your cart is empty.
Your cart is empty.Product Description
Dan Wolff
2025-09-04 18:21:10
Nice small format, takes up little space. Everything worked on first plug in. Simple to mount and very well made. Wokred well for my little network cabinet. Now the smokes cabinet glass door and it will be complete.
🥸Shopping Here Since '95
2025-08-30 21:20:45
This 4-port patch panel is made with thick, quality metal, with reusable cable clips and changeable CAT6 Keystone Couplers pre-installed. Since you can easily remove the Keystone couplers, you can make this patch panel box a mix-and-match with any combination of CAT5, CAT6, CAT6A, or even CAT8 if you want/need. You could even use Keystone HDMI couplers or any other type of Keystone coupler you might need. The cover is tool-free yet still very secure. Each cable is secured with a reusable ratchet lock that securely holds the cable in place. There are multiple ways to mount this metal patch case included. Before putting this patch device to work full-time I wanted to run some tests and all of the couplers tested as 100% working. I highly recommend is 4-port CAT6 patch panel, and I'm sure the rest of their products are just as good.The only thing that I couldn't figure out is why the one hole in the back under where the cables come out. I'm sure there's a reason for it and I haven't done large-scale networking for almost a decade, so I most likely just don't remember what that hole is used for.🤣🤷â€â™‚ï¸ðŸ» *Statement/Disclaimer: This review is part of Amazon's Vine Program which provides products at a reduced cost in exchange for sincere/frank reviews. The products are not offered completely gratis, as their value is taxed as income in the US. I take pride in writing honest, accurate reviews based on many product factors. I try, use, and test all products that I provide a review. No part of this review has been constructed using AI. (Note: AI may perform small grammar and spelling corrections.) Once a review is posted, I will not alter that review for any reason, even if contact from a Vine provider has been made to rectify a negative product experience through Amazon Messaging. The opinions and statements above are my own and may not reflect others' experiences.
Jay A.
2025-08-18 17:40:00
This 12 port patch panel comes with 12 keystone connectors already installed. You can remove these if you want to use your own but if you are running CAT6A cable there is no need to. It also comes with mounting screws in case you decide to mount on drywall or clips in case you decide to mount on a DIN rail. The keystones provided fit snuggly and I would say you are better off using these. On the "line in" cable side it has cable clips to help with cable management. This worked great for me to keep the 6 POE cameras I was networking organized so that I could see which one was which. There is a white rectangular spot in the front where you can write your own label to identify your lines. However, if you intend to reuse these then I would suggest to use stick on labels on top of these instead. This is my first patch panel I have installed so I can't offer any comparisons to its price or its effectiveness compared to other patch panels but in my opinion it is well constructed and after it was installed it looked like it will serve its purpose well.
Robert Novak
2025-05-21 16:08:35
This is a good quality patch panel for wall, desk, or mini-rack mounting.I got it to put into a 10" rack build I'm working on, and while it's not installed there yet, the functionality is what I expected. It comes with 12 Ethernet keystones, but you can swap them out for fiber (if it fits), USB, HDMI, coax or other keystone modules to fit your needs.Note that this is *not* a switch. You run a cable in the back, and connect the same kind of cable in the front. Completely pass-through. At $43, it's a bit of a premium, but if you need this form factor, it's quite reasonable.
JXE
2025-04-23 15:22:24
Pros:High-Quality Build – Sturdy metal construction with shielded design for enhanced durability and protection against interference.CAT6A Compatibility – Supports high-speed networking with up to 10Gbps performance, ideal for modern home and office networks.Smart Cable Management – Well-designed layout makes cable organization and routing easier.Shielded for Reduced Interference – Helps minimize crosstalk and electromagnetic interference for a more stable connection.Keystone Design – Allows for flexibility in port configuration, making it easy to customize or replace keystones as needed.Standard 1U Rack Size – Fits perfectly in standard server racks or network enclosures without requiring modifications.Easy to Install – Clear labeling and well-spaced ports simplify setup and maintenance.Cons:Limited to 12 Ports – May not be sufficient for larger network setups that require more connections.Slightly Tight Port Spacing – Can be a bit cramped when using bulkier shielded cables.Final Thoughts:This 12-Port CAT6A Shielded Patch Panel is a solid choice for those looking for a durable, high-performance networking solution with smart cable management. It offers excellent shielding, easy customization, and reliable performance, making it ideal for small to medium-sized home or office networks.
Super Popps
2025-03-15 17:58:08
This panel has a rock solid build and is easy to set up. It includes add-on tabs (I think for a rack mount?). After popping off the back case, the unit is simple to use and the wires are easy to separate and keep organized. Wires are all very firmly held from both inside the rack and in the front, no loose cables. I used the mounting holes to attach it to a 2x4 in my utilities area, it's not going anywhere. Great buy!
P. R.
2025-01-08 17:10:34
This panel is great. RJ45 on each side of the port is so nice. I don't love punching down pairs, especially in panels that have ports changing regularly. I like the ease and flexibility of terminated pairs in a connector. The enclosure is a nice feature as well, making it sit clean in my array of switches and firewall.
Recommended Products