Your cart is empty.
Your cart is empty.Product Description
Installation preparation
The assembly of all calibration shall meet the maximum flow requirement. Please clean the port and fitting before installation, it will effectively avoid bring dust to the air path. Pay attention to direction of air flow and arrow pointing on product body if correct, minding port and thread size if match.
Drainage
The water column is discharged automatically when there is no pressure, and the air flow is closed when it passes through. When the water level exceeds the upper limit, drainage must be performed; otherwise, the dehumidification effect will be poor.
Installation of barometer
When installing the pressure gauge, wrap the raw material belt on the thread of the barometer before installing it. Ensure that the pressure gauge is firmly installed on the main body. Pay attention to whether the reading rises and falls smoothly when adjusting the pressure.
Step 1
Hold the spin button and pull up.
Step 2
Turn the rotary button to adjust the pressure.
Step 3
Check the pressure through the pressure gauge
Step 4
Press the button to lock the pressure.
Kindle Customer
2025-07-17 18:17:47
I have only one issue which isn't a deciding factor, the gauge doesn't have psi on it its kpa and one other.. again not an issue..I just convert from psi to the reading on gauge.. works great! Worth the moolah
Gerardo
2025-01-30 17:02:00
Se instalo facilmente ya que cuenta con conexiones requeridas y el precio es aceptable
Recommended Products