Your cart is empty.
Your cart is empty.Product Description
- The center slide T-nut has high hardness and durability, making it a good choice for sliding nuts and fasteners.
- The center slide T-nut with thread offers excellent strength and reliability in its connections.
- Insert the sliding nut into the T-shaped groove from one end of the aluminum profile, and then connect the aluminum profile with other components.
The Bolts Set made of iron and coated with galvanized coating to ensure durability and prevent rust.
This bolt kit are widely used in aluminum frame structures, CNC laser cutters, 3D printers, CNC router machines, etc. They are an economical and practical choice for both the household and building industries.
The nut has a raised thread layer, which increases stability and reliability.
Cole
2025-09-06 14:21:22
Worked on my Victory4x4 Roof Rack. A little tougher than I expected to slide through but I figure that will help keep them stable while on the road.
David Albrecht
2025-08-21 12:39:06
If you need a bunch of T-nuts and screws, this is a cost effective approach. That said about one third of them had really rough threads and were hard to start. Once started they were fine but there is a noticeable variation in quality from the nuts and bolts in my box. Some were nice and smooth and others had visible burrs and rough threads. Even at a 50% discard rate though they would still be a bargain, which is why I am giving them four stars.
Frangela-2
2025-08-20 18:59:00
Used these to anchor down my CNC spool board. Worked great!
JR
2025-08-18 16:35:21
Used these to attach some L brackets to a cargo separator that was missing OEM hardware. Had to use longer screws but the nut ends fit the small T track in the separator very well. They grip nicely and keep the separator rock solid. If they loosen up I will use some blue lock tight. I can use the extra pieces to mount stuff on the T track if need be.
Bebobily
2025-07-16 12:01:29
There's a 50/50 chance of cross-threading these slides on the first or second try and the metal is soft enough to render them useless when/if they do. Find better.
El David Grande
2025-02-08 15:54:05
These are what they say they are - 1/4"-20 t-nuts and shorty bolts, great for building into 3D prints in my case, and they work in the extrusion I've tested them with.No complaints.
F. Ong
2025-02-06 16:47:27
This set of T-nuts and bolts combine the pieces to make reasonable fastener setup for any T-track or slot arrangement. Just be sure the the T-slot is of the smaller 1/2" variety for the T-nuts to be truly secure, otherwise, the nuts will wiggle and allow deflection of the piece the T-bolt is going through.I took off a star because I didn't like that the finish on my set of nuts and bolts was a little rough, even allowing for the galvanized coating. Otherwise, they'll do the function.
Jordan
2024-12-19 16:15:38
Used these in extruded aluminium track and they fit perfectly in 1010 series. They hold tight and the screws went in smoothly. The black finish on them is nice and sleek. Has a real finished quality look to them.
Frozen North
2024-12-02 10:27:49
I used these with strap hooks on my GoRhino cross bars, fit well and so far - haven't lost any cargo!!
Recommended Products