Your cart is empty.
Your cart is empty.Product Description
Product Description
J Newcomb
2025-09-03 19:24:37
These are the preferred method of adding attachments to 3D prints. They are more forgiving than threading into prints or tapping holes. Place on end of soldering iron and position straight.
RDJ
2025-08-18 15:15:01
These are fantastic for 3d prints. I usually design a hole in what I need the insert for. Sits recessed in the hole, then take the soldering iron with a heat insert tip, and voila. Pushed right in and is super secure.
Siber Freak
2025-08-02 19:05:06
They worked exactly as advertised, I used them to build a custom stand for my midi which is still standing strong even after me beating on it for a couple of weeks now.
dumgoat
2025-07-20 16:30:24
These threaded heat inserts from Zwmssll work well for 3D printing. I ordered a 110-pack of M3x5x4 inserts which measure roughly 5mm high/long and 4mm wide. The smaller than average width means they have relatively thin walls. However, they thread nicely onto M3 bolts and work well once pressed into the plastic.
Andre J Pruitt
2025-07-14 17:46:29
I use these all the time in my 3D printing projects. They are easy to install with a soldering iron and add a little bit of class to my designs.
B004332
2025-07-04 15:51:34
Es buen producto para impresión 3d, lo compraré nuevamente
Anthony
2025-07-03 17:53:28
3d printing
Commodore Keith
2025-06-22 14:23:11
Fantastic set of sizes and lengths. Checked dimensions and all were spot on.I don't have a 3D printer but I planed to use these while building a 12V power distribution panel from a sheet of ABS. Test run went perfectly installing 5mm inserts and then attaching a fuse block.However, after a health delay, the project went a different direction using sheet metal rather than ABS. So, this kit and the ABS sheet are on my shelf waiting for another application.
J Newcomb
2025-06-11 11:04:58
These are the preferred method of adding attachments to 3D prints. They are more forgiving than threading into prints or tapping holes. Place on end of soldering iron and position straight.
RDJ
2025-06-01 16:42:37
These are fantastic for 3d prints. I usually design a hole in what I need the insert for. Sits recessed in the hole, then take the soldering iron with a heat insert tip, and voila. Pushed right in and is super secure.
Siber Freak
2025-05-07 18:19:27
They worked exactly as advertised, I used them to build a custom stand for my midi which is still standing strong even after me beating on it for a couple of weeks now.
dumgoat
2025-04-21 16:52:38
These threaded heat inserts from Zwmssll work well for 3D printing. I ordered a 110-pack of M3x5x4 inserts which measure roughly 5mm high/long and 4mm wide. The smaller than average width means they have relatively thin walls. However, they thread nicely onto M3 bolts and work well once pressed into the plastic.
Andre J Pruitt
2025-02-23 13:25:19
I use these all the time in my 3D printing projects. They are easy to install with a soldering iron and add a little bit of class to my designs.
B004332
2025-01-19 14:43:46
Es buen producto para impresión 3d, lo compraré nuevamente
Anthony
2025-01-13 14:11:09
3d printing
Commodore Keith
2025-01-01 14:47:59
Fantastic set of sizes and lengths. Checked dimensions and all were spot on.I don't have a 3D printer but I planed to use these while building a 12V power distribution panel from a sheet of ABS. Test run went perfectly installing 5mm inserts and then attaching a fuse block.However, after a health delay, the project went a different direction using sheet metal rather than ABS. So, this kit and the ABS sheet are on my shelf waiting for another application.
Recommended Products