Your cart is empty.
Your cart is empty.Product Description
BUILT TO LAST
Constructed of chrome molybdenum steel, the bearing extractor tool is designed for strength, durability, and longevity. Finished for rust and corrosion resistance.
- Hammer Weight Features Flared Ends
- Hardened Steel Increases Pulling Force
- Remove Tightly Jammed Axles, Wheeling Bearings, And Bushings
CONTENTS
Insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure
Attach the slide hammer and yank the weight towards the handle to give an extra snap of force
Repeat action until the bearing or bushing has been removed.
Collet Sizes: 8-11mm, 12-17mm, 18-23mm, 24-29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, and 54-58mm.
Screw Adaptor Sizes: M10x1.5p, M10x1.5p/M8x1.25p, M10x1.5p/M6x1.0p.
U-shaped bearing seal puller can be used by threading the bushing puller onto the collet.
Tighten the nut on the top of the assembly to slowly pull the bearing out of place.
Use this tool to finish the job without damaging the removed parts.
computer user
2025-08-22 16:35:15
When I first opened the box, the contents were mismatched and loose in the box. The box is probably strong enough but rough handling in shipping will cause these rather heavy steel items to slide loose from their internal holes. It had no effect on the tools, they looked fine. I used them to pull and replace bearings in a mini lathe and they worked well.
Katrina Kalblinger
2025-07-17 14:04:16
worked better than expected
Jasen B Hicks
2025-07-01 15:16:38
The tool works really well for pulling bearings. Lots of options and will be really helpful for my projects. I want to say that I have a lot of cheap toolkits like this and most of them come with the worst cheap crappy cases. This one is no different, except that it's absolutely the nicest cheap crappy case I've gotten so far. The closure tabs are actually quality and snap closed when you need to put the tool away. A very nice touch for an inexpensive useful tool set.
Customer
2025-06-27 15:33:49
The first time I used this tool to remover bearings out of a motorcycle case the small the jaws on the small puller bent. Also the jumps between sizes makes it hard to get the right size for several of the bearings I needed to remove. I have to grind the ends of the jaws so they were thin enough to get behind the bearings I was trying to pull.
Ryon L. Adcock
2025-03-12 13:38:48
I have used this tool multiple times and have found it to work very well. The tool has been very reliable and does as described. I have removed very small and hard to reach bearing that have been pressed into a cavity. I have used it on crank bearings on a motorcycle and it worked fantastic also. So, if you need to remove a bearing this tool is a great value for the money! It simply works!
Scott D. Gibson
2025-02-20 15:54:32
This set was ordered to remove a stubborn outside race on a BMW motorcycle final drive. It was just the ticket and worked perfectly fine. It comes with both a threaded press and a slide hammer so the versatility is there from a tool and size standpoint.I'm pretty sure the set I received was used. The case is all cracked with finger grease inside everywhere. It arrived loose in a cardboard box with the pieces falling out so I'm shocked it was complete because the shipping box had a flap open. In the end, the thing worked but when you pay for something, you want to know it's yours.
John L. Arnn
2025-02-15 10:10:17
These precision tools are great for the mechanic or shade tree worker.
Brian Wild
2024-12-26 15:36:02
The tool worked exactly how I needed it to.
Recommended Products