Your cart is empty.
Your cart is empty.Product Description
Heavy Duty Push Button Switch
- Rating: 20A 12-24V DC
- LED Color: Blue/Red/White/Green/Yellow
- Protection: IP67 IK10
- Operation: Latching / Momentary
- Structure: 1NO
- Mounting Hole: 19mm / 0.75"
- Working Temprature: -30℃~+80℃
- Package Content:
- 1* Push Button Swith
- 1* Plug Harness
Long Work Life
- The metal shell and push part is not easy to damage.
- The Mechanical work Life is 500,000 times
- The Silver Alloy contact makes the Electrical Work Life more than 100,000 times.
Waterproof IP67
- The shell is full metal and there's a rubber ring to seal the mounting which make the switch achieve IP67 Waterproof degree.
- It can be used in humid environment, such as boat, Marine etc.
5 Colors for Choice
- The LED is pure and bright.
- There are 5 colors for your choice: green, blue, orange, red and white.
- LED Life: 40 000 Hours.
Frank G.
2025-09-07 12:33:12
Great lighted switch! I used it to turn on my LiFePO4 battery Battery Management heater circuit to allow cold weather charging of the batteries. Since the heater is only needed during very cold conditions, 20F, I don't want it on all the time. The flush mount button prevents accidental switching to the "on" position and the bright red halo light indicates if the switch is on. Everyone easily recognizes if the switch is "on" even though it is in a panel with several other switches, so it has not been accidentally switched on.
Marzena
2025-08-12 16:17:09
Great product, easy to install. I have it installed on white PVC railing. Works as expected.
Bill
2025-08-04 14:41:32
I like the fact that the light can be wired to be always on or only illuminated when switch is on.. It looks well, but I had broken the back off the first one and had to buy a replacement - so back must be protected. But works well!
Dwayne Collingwood
2025-07-05 14:29:38
It powers up a small 15AH LiFePo Battery I built for Parks on the Air Amateur Radio work and doubles for emergency backup inverters and/or cell phone charging, all in a plastic ammo can.It's a soft feel on and off, but feels built to last. I chose to solder my wiring onto the terminals as they stuck out a little further in the ammo can I put it in, but that was just my choice to save room.I would recommend this to anyone looking for a cool glowing circle pushbutton switch that is easy to install and can handle a nice load though it. I wouldn't think twice to buy another.
luis gloria
2025-06-25 17:06:20
it switch's stuff just what I need
Gabe
2025-06-04 18:14:16
I received the product. The markings on the product say clearly that is rated at 250VAC 15A. I bought the product because of the 12v DC LED, and the 20 Amps rating. Upon contacting the seller he claimed that the rating is 20 Amps, that they are just reusing the bottom part from some other piece. I am not sure what to think, as a mislabeled electrical product is even more dangerous than a misrepresent one. In any case I can't advise anyone to buy the switch unless they are powering something low amps, like LED lights. Don't expect for the built in LED light to work with DC (it is rated for AC) , and beware as electrical products have a tendency to set themselves on fire when used incorrectly.
Mkhunley93
2025-04-09 16:30:15
Bought this to toggle the courtesy lights in my sailboat's cockpit. Works great and can be wired to stay lit up when the lights are off, so it can be easilly found in the dark. Good stuff.
Hunter C.
2025-01-16 13:13:17
Nice switch. Good metal feel.
Recommended Products