Your cart is empty.
Your cart is empty. Action Type: Momentary
Poles: SPST
Rating Voltage: AC 250V/ 1A
Terminals: 2 Pins
Diameter of Thread: 6.9mm/ 0.27in; Diameter of Cap: 6mm/ 0.24in; Pin Pitch: 3mm/ 0.11in
Warm Tips:
Choose the appropriate electric soldering iron, and speed up the welding speed.
It is recommended to use 20W electric soldering iron to complete the welding in three seconds.
The flux must be the right amount. And try to turn the pins of the switch down when welding.
In addition, it would be better to use plug wire with terminal, such as pins with spring, auxiliary plug and try to avoid direct welding.
Package Includes:
2× Mini Push Button Switch (Red)
2× Mini Push Button Switch (Black)
2× Mini Push Button Switch (White)
2× Mini Push Button Switch (Yellow)
2× Mini Push Button Switch (Blue)
2× Mini Push Button Switch (Green)
Dgm
2025-09-01 12:08:50
I used the N/O plunger switch on the cutoff for a lawnmower. The way something lawnmower ate set up you need to squeeze the handle to start them and evertime you let go of the handle it shuts off the lawnmower. So if you need to stop to pick something up that in the path of your cutting such as a downed branch or a piece of paper you need to restart the lawnmower to me that's mighty unhandy. I know it's a safety thing but you can't fix stupid for some people and that's why they built safety features like that. For me it's a inconveniences so I have overridden it. I am not suggesting to do this but if you find it unhandy like me these switches work perfect for the kill switch. If you are smart enough to override the handle control and install the switch them you are competent enough to run the lawnmower without having to use the built-in safety feature.Just a note be careful soldering the wires on you don't need much heat !!!Remember that these are plastic switch.
Timothy Watts
2025-08-22 11:48:20
I have ordered thses little momentary push buttons in the past for uses from magnetic disruptions to power buttons for to activate a acuator to open the doors of my compition truck. these little buttone are usefull for any reasion where you need to give or remove power to a devcice for a temempary reaction, like powering an actuator, changing the colors on a guage or disruption of powe to an electromanget.these switched work so well that they almost never need to be replaced. I hope this helps in malking your descisions
M. Nomine
2025-08-16 10:37:43
I used one of these switches for a push button open activation for my electric gate opener. It works fine. The problem is that now I am stuck with 11 switches I don't need.
Jed Hammond
2025-08-06 18:34:21
Bought these to repair my grandson's remote control car. Only needed one push button switch but it was no great expense to buy a pack of 20! The switch was small enough to fit through the side of the toy car and he was happy to have it working again.
Paul J. Moore
2025-07-13 12:10:30
Perfect
Lisa K
2025-04-03 18:15:54
these buttons function, but with a lot of bounce and inconsistent, mushy travel of the button. These do not thonk.. they sort of just squish.
Wayne T
2025-02-27 10:02:40
This style of switch has been around forever and so must be pretty good. There is no tactile feedback but for the money I don't expect that they would. They're small enough to fit into a tight space and the colors are nice to differentiate functions. Would buy again.
Kent
2024-12-18 11:18:23
No problems so far. Nice little switches. I hope they hold up over time.
Recommended Products
