Your cart is empty.
Your cart is empty.Product Description
1Ton Arbor Press With Hand Wheel
- Equipped with a hand wheel to perform light and quick press work
- Applies 1 ton of continuous force
- Solid anvil surface for tough pounding and shaping tasks
- Design fro riverting,squeezing,bending,pinching,flattening,removing a bearing or pressing in bearing
- machined anvil has 4 slots to provide convenient support for workpieces that vary in size and shape, The Hole of end of the ram 3/8" Dia.
3 x Punches (Flat/Pointed/Round) and Wrench
3 x punches and a magnetic inserrts to hold the punch
Machined anvil has 4 slots
machined anvil has 4 slots to provide convenient support for workpieces that vary in size and shape,
Rram arbor hole:3/8 Inch
The 10# part Anvil size:
Thickness: 19mm
The hole size(4 Slots) is 15,20,25,35mm
Ram Size: 1 inch square by 9 3/4" long
Material：Cast iron
Maximum distance between the Ram and the Anvil: The maximum distance from the ram to the anvil is 5.25 inches
Rram arbor hole:3/8 Inch
Joseph L Audino
2025-08-10 14:55:18
I had been looking at 1 ton Arbor presses for 6 months or more. I thought a hand wheel would be a nice convenience. I was finding prices in the $80-100 range without the hand wheel. $140 & up with a hand wheel.Found this one on Amazon For $55 & free shipping.Came very well packed, it was clean & easy to assemble.For my first project, I bought a set of round hollow dies to punch out iron on patches. It worked like a champ.Now that I have it, I know I’ll find many more uses for punching & stamping for leather, metals, & many more crafts.Very pleased with the purchase.
Customer
2025-07-27 18:39:33
Four stars because it's a reasonable value for the rather low price. Casting seems solid enough. No depth stop collar provided, if that matters. There are four adjusting screws, two to adjust forward-back play in the ram, and two for left-right play. The sideways pair have no gib plate provided, so I cut a slice of UHMWPE plastic for this purpose. Now with the four screws tightened up, I can grab the ram and shake it and and feel no give or rattle either sideways or front-back, but (having applied SAE 30 oil) the lever still moves it more-or-less smoothly up and down, so that much is good. I should be able to mount a small die punch on the ram directly, without needing external alignment fixturing. The spline gear teeth on the rotating shaft appear very rough-cut, and the tolerance of that mating with the rack gear on the ram is incredibly loose IMO but maybe it's typical for this kind of crude machine. The plain-bearing hole in the cast frame that the splined shaft goes through to the lever handle is almost 1 mm oversized. I wrapped several layers of silicone tape around the shaft there to reduce the slop, although that may not really matter much to operation. There is a super-weak magnet in the hole in the end of the ram, to hold a drift tool, but it's barely enough to counter gravity and the tool is easily dislodged. The knob to hold the operating lever arm position cannot be tightened enough to really hold it- maybe could cut a groove in the arm to retain that screw. All in all, this arbor press can be made to work. Just don't expect close fits, or really any sign of craftsmanship at all.
OtherMick
2025-06-18 13:02:20
Very nice Arbor press, all around a good unit, but there is no stop collar included, others have found that there is no stop collar contrary to the listing claim that a stop collar is included with the press, I probably would not have ever used a stop collar regardless do not mislead consumers with false statements, Besides this issue the press itself is well made and a excellent press even lacking the aforementioned stop collar.
Shawn M. Pettit
2025-06-13 12:08:12
The wheel did not attach to the shaft. Parts were manufactured out of tolerance. Could not use
Aaron M
2025-06-05 16:43:54
You can't go wrong for the money.
albert c.
2025-05-23 18:53:25
Sadly the one I got was not up to par even for a cheap press. I usually dont expect perfection and also expect to work on items to make them better. This one had to many issues. Holes not centered and some rough finishing. But the worst is that the gears or splines on the pinion as they call it seems like it was done by someone with a dull machine. So bad that if play is taken out of the ram the pinion jams. So for it to work I need to leave the ram loose. It will suffice for what I need but still, it's basically not worth buying. I would not buy again. Spend more money if any sort of decent operation is needed.,
Elizabeth Calfee
2025-05-16 14:45:55
As some other reviewers mentioned, the punches did not stay in the arbor using the magnetic insert on the unit that I received. I submitted a question via Amazon asking if they had replacement parts for this and the LLDSIMEX agent was responsive and helpful using Amazon messaging. They sent out a second unit which works better with the punches. I can make it work for my purposes when I need to use the punches. Otherwise, this is a sturdy and functional arbor press with better fit and finish than I expected. Overall, I'm happy with the purchase.
Kirby
2025-04-21 15:23:30
Does not come with a depth stop collar. Instructions/parts list mention it as not pictured as well as include instructions for using the collar. Searching the phrase led to an image of a metal disc with a square hole and set screws that would lock it in place around the ram and stop the ram at a particular depth.Otherwise it is a solid machine exactly the quality you would expect for the price.
Robert Virtue
2025-02-09 11:20:15
It’s a clean casting and soothe operation.
Recommended Products