Your cart is empty.
Your cart is empty.Product Description
Specifications
- Input Voltage：DC 12V
- Max Load：1.44lbs/6.4N
- No Load Travel Speed：6"/sec (150mm/s)
- Noise Level：＜50dB
- Operation Temperature：-25℃~+60℃
- Protection Class：IP54
- Duty Cycle：10%
- Limit Switch：Built-in
How to install the actuator ?
- The linear actuators are controlled by applying a 12V DC voltage.
- Black wire to the positive terminal and red wire to negative terminal will make it extend. To make it retract, reverse the terminal connections.
- The actuator has pre-installed limit switche inside, it cannot be adjustable.
- It can be stopped at any position, with self-locking function.It will hold its position when the power is off. It will auto stop when it reaches the end.
How to protect the actuator ?
- Please use the 12V DC power battery. If using smaller voltage, the product cannot work well, use bigger voltage maybe will damage to the product.
- The mini linear actuator is suitable for pushing objects, not for pulling objects.
- The actual load does not exceed the rated load.
- Please don't store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce motor efficiency.
- The operating frequency of this actuator is 10%. It means that your actuator needs 18 minutes to rest for every 2 minute of work.
What‘s in the box ?
1 x Linear Actuator
2 x Mounting Brackets
M. Hughes
2025-04-01 16:19:10
Works perfectly. No problems at all.
Bryan
2024-11-20 16:07:21
The media could not be loaded.
Recommended Products