Your cart is empty.
Your cart is empty.Product Description
Tipfun .22LR Red Laser Bore Sight End Barrel Easy to Fit Revolvers Pistols Rifle and Air Guns
- Suitable Size:Suitable for .22 LR chamber.
- High Accuracy:The bore sight is designed to provides a precise reference to zero-in your optic and iron sights so as to save your time and money.
- Battery life:Comes with 4 sets of batteries (12 LR41 batteries) ,which have longer service life.
- Material:Sturdy brass construction,easy to sit perfectly in the bore.Using high quality laser module with qualified electronic components to support longer and consistent lifetime.
- Spare parts:Multiple spare O-rings(12 total).
Waring
- 1.Keep boresight light beam away from eyes.
- 2.Before boresighting your scope, make sure that the firearm is unloaded and the muzzle is pointed in a safe direction.
- 3.After the firearms is boresighted, make sure to remove the boresighter from the firearm.
Packing Includes:
1 x Boresighter
12 x LR41 batteries
12 x O-rings
1 x Packing boxes
NOTE:
NOT FIT ba-rrel with a mu-zzle brake.(su-ppressor/si-lencer)
AZsooner
2025-07-12 15:00:17
This laser unit works well, is easy to set up and use. It is a good quality product.
Capt Bill
2025-06-12 18:30:42
It made it super easy to sight in my .22 pistol with a red dot scope. Comes with 4 sets of batteries and extra o-rings.
Brady H
2025-06-05 18:09:39
This is very nice for getting a general zero on rifles. You will obviously want to zero with a few rounds when you have a chance, but this will keep you from wasting rounds trying to find close to zero. The laser is very bright as well and can be seen easily in the day light. It fits in the end of the barrel or the chamber of your rifle depending on the caliber very easily.
Jimmy Jo
2025-06-02 10:19:23
I would give this product a 5-star but the laser is not very powerful for a 25yd sight in. It works out to 25yds but the laser dot becomes a laser splotch, a dim 2" circle. It still got me on paper at 50yds so it did it's job but you have to test it near dusk to see the light. Great design and I'd pay a little more for a better beam.
Huy Le
2025-04-21 18:17:03
The device is designed to be inserted into the muzzle of the barrel in such a way that it provides a secure connection that is perpendicular to the axis of the bore. The design is both small and lightweight, adding to the ease of the product by making it simple to use and maneuver with a variety of different kinds of firearms. After being fitted, the bore sight will offer a reference point that is both extremely visible and accurate thanks to the red laser that it emits. This laser beam makes it possible for sights, scopes, or red dot optics to be aligned quickly and accurately, which substantially simplifies the process of zeroing in on a target. I am now able to obtain ideal alignment with ease and confidence, regardless of whether I am practicing on the range or in the privacy of my own garden. This bore sight genuinely impresses me with its wide range of application possibilities. It is suitable for use with a diverse selection of weapons, such as revolvers, pistols, rifles, and air guns, among others. Due to the device's adaptability, I am able to use it throughout the whole of my collection, which frees me from the need to maintain several bore sights. Because of its dependability and versatility, it has become an essential component of my collection of weapons.
Holly N, Bauman
2025-03-16 16:16:09
I have the same issue with this one as I did with the 1st one that I ordered. The part that screws into the laser the treads are loose and does not work when screwed in. The laser will work with the batteries and without the part that goes into the barrel, once touched with the barrel insert part the laser goes out. Yes, I have the insulator per instructions installed. I thought maybe some how it was grounding itself out, so I even put Teflon tape to act as an insulator. Still no luck. I hate to send this one back too. No choice, but I am going too. I will order a different brand. I have reread the instructions 4 times to make sure there is not something I am not doing correctly to cause it not to work.
SMGP
2025-02-06 11:07:11
Can't beat it for $15 on the paper. 9mm 10mm and 45s
Aaron Martin
2025-01-22 17:30:29
This thing is SO far off-- at 10 FEET (yes, 10 >feet** Correction!!Once I used the proper O-Rings to seat the thing, it was spot-on, both on 9mm and 10mm, and it was compared with my Bore-Sight...The issue is that its not "obvious" which O-Ring(s) to use-- and they are a bit fragile. For the 10mm I had to use a "thicker" O-Ring-- it required me to use needle-nose to spead it to get on the device. They include some others (white) which when spread just break in half (And, at least I couldn't get them over the device itself :shrug:)BUT-- for $13 bucks, its not bad-- HOWEVER, for $25 bucks:https://www.amazon.com/dp/B0874FJS7Q?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1Does the job, and I was able to use it on 9mm, 10mm [ ** 5.56(.223) WILL NOT FIT ** ] with ease... It's pretty obvious (to me) which one to choose, unless $12 bucks means that much to you...
Recommended Products
$26.99
$ 12 .99 $12.99