Your cart is empty.
Your cart is empty.Product Description
Printer Stand with Storage
4 Lockable Wheels /360° Smooth Swivel
Fabric Storage Drawer
Mary F.
2025-08-24 12:49:48
This stand was fairly simple to assemble and didn't take long.There was a chip out of the corner of one of the top panels. But no one is ever going to see that because the printer lives on it now & forever. The bottom shelf that is more exposed is pristine without any flaws. The drawer is fabric and it looks like the pattern repeated at an unfortunate spot on the front panel of the drawer and looks like a stripe or a crease just to the left of the handle. It's hardly noticeable because my printer actually overhangs the front of the stand so you can't really see the drawer unless you're across the room. And at that distance the flaw isn't noticeable.Even though I measured for purposes of fit and ability to accommodate my laser printer's size and weight, I was a little perturbed that I trusted the photos with the product showing a couple of binders on the lower shelf under the drawer. That is misleading because as you may be able to see from my pictures, that space is not tall enough to hold a binder. Again, though, the measurements in their specifications were accurate. After looking at many different stands I whittled my list down to a few that I liked and chose this one from those finalists relying a little too much on the pictures. Sometimes having so many acceptable options makes decisions even more difficult. But I'm not mad, just disappointed. ;)They provided a set each of either adjustable stationary feet or casters, depending on your preference. I have the stand under my new motorized adjustable height standing desk and I may need to roll it out from under if I choose to lower the desk, but that's probably not happening any time soon. The casters do roll easily and can be locked. I was expecting the casters to be white as depicted in the pictures, but I got black which is perfectly acceptable to me but thought I'd point it out anyway.The stand is supposed to be able to hold up to 88 lbs. The laser printer on it now is probably a good 40-45 lbs. And as I said it slightly overhangs the back and front. I could've oriented the printer to fit sideways but then I couldn't easily access the front panel of the printer or the drawer and frankly it would've looked wonky and bugged me. I use the scanner bed a lot so I will need to roll out the stand to be able to open the scanner lid. I'll also need to roll out the stand to open the printer to change the ink cartridges, clear paper jams or do any internal maintenance. This stand gives me all that flexibility with ease.For the money, I forgive the small chip and drawer front flaw. This stand fits perfectly under the standing desk and looks neat and professional. I would recommend it.
Ramona
2025-08-18 17:54:57
3-tier version holds all my packages of paper. Printer is on the top shelf, with bottom shelves dedicated to holding paper. I have a package of 11x17 tabloid size paper which is too wide to lie flat on the shelves, but fits sideways on the middle shelf with the shelf set at maximum height. . This also leaves room for an oversized paper organizer on the same shelf. The drawer is a good size to hold specialty papers and printer cables. The side pocket holds ink containers and a roll of printable vinyl. Very pleased with how organized this keeps the printer and supplies. It was easy to assemble.
Mr. G
2025-08-10 12:29:51
This was the table I have been searching for. It has the wider surface made for wider printers and you can choose if you want wheels of plain feet. It comes with all the tools you need for assembly so you wont have to dig into your toolbox.My only gripe with this is that the top comes in 2 pieces and I wish it was just one so it would be seamless.Other than that, it's perfect!
Nicole
2025-06-04 14:21:34
Love this printer cart! It slides right under my desk - that's a huge plus for me as I have very limited space. It's very sturdy. For it's size, it's got plenty of space. I actually store two printers on the cart - one on top and one underneath. I also had an issue with assembly and Customer Service was great! Definitely recommend
melloydy
2025-05-31 13:39:10
It was smaller than I expected, but fits my large printer. It is sturdy with the printer on it. Has options for wheels or no wheels and extra parts. It was super easy to put together and I always struggle with putting things together. :)
John Hess
2025-05-20 14:27:09
Easy to assemble and holds my old HP LaserJet printer. I keep an extra ream of paper on the shelf.
S. Forti
2025-04-21 18:49:37
This was bought to put an ice machine on. The opening where our old built-in ice maker was, measured 15.25â€. The description states the width is 15â€. We were going to use it sideways and would work perfectly. Got it put together and tried to put it in the space, and it measured 15.50†Unfortunately, hubs accidentally put a screw through the top so we can’t return it. Very disappointing. He’s going to try and cut it down to fit. It’s going to look awful and unfinished. Beware, the drawer is cheap fabric material. Definitely not worth $49.
quasarqueen
2025-03-22 11:22:35
This fit perfectly in the space I had planned for it! Knocked a star off because the drawer is fabric (think those cubes you get to go in square shelves). Assembly was simple and I got it done in about 30 minutes. Seems sturdy enough for the printer I purchased it for and the little casters roll nice and smooth!
Erk Dante
2025-03-14 18:15:53
100% recomendable para colocar la impresora y otras cosas, buen material de metal y madera y solo el cajón y soporte de a un lado de tela pero es resistente, muy bien tamaño para la impresora y fácil instalación!! Recomendado!
Daniel
2025-03-06 17:17:02
Excelente, cabe perfectamente en el espacio de abajo de cualquier escritorio, facil de armar, muy resistente, y el cajon es espacioso, el unico defecto que se me hizo un poco elevado de precio
Correal
2025-02-24 15:25:39
Tamaño y caracterÃsticas convenientes
Ricardo
2025-02-14 16:12:09
Excelente producto y embalaje.
Karla
2024-12-29 15:35:53
Me llegó a tiempo aquà a Guanajuato llego antes d ella fecha estimada afortunadamente nada venÃa roto o con piezas faltantes, es fácil de armar viene con todas las herramientas, yo lo pinté ya que no me gustaba ninguno de los colores, lo único que no me gustó mucho fue que los cajones sean de tela tenlo en cuenta para que no pongas nada pesado. Abajo puse mi estuche de la Dyson y quedó genial
Recommended Products