Your cart is empty.
Your cart is empty.Product Description
Printer Stand-Black
Printer Stand-Antique Brown
High Quality Buyer's Show
Helps to nicely organize your desktop.
I was looking for something to help bring some order to my desktop, and this stand was the perfect fit. A computer monitor wasn’t feasible for me since my computer was already at eye level. But I needed something to help organize items on my desk and this stand dies that perfectly. Very sturdy and perfect fit for my printer. It did take me about 15 minutes or so to assemble, not too bad really. A few spots aren’t perfectly flush and I noticed a small chip in one spot, but not worth sweating over to return/exchange. Other then that, I’m pleased overall and happy with how it’s help get my desktop organized.
Perfect for our office
This printer stand falls in to the "I didn't know I needed this until I got it" category. I love it. It makes storage of printer materials so much easier! It was very easy to put together. I originally bought it just to put the printer higher on the table, but it's really doing much more.
Good storage for printer and desk items
Sturdy, good size, wood finish matches my desk. Provides good storage space for office items.
Exactly right!
Perfect! Exactly what I needed and was so simple to put together. Very happy with this purchase!
C2
2025-09-05 11:39:01
This was easily assembled. The directions are just pictures, but they are easy to understand. It comes with all the hardware necessary to assemble, even a screwdriver, which was helpful. All of the holes were predrilled perfectly and went together well matched. I was concerned that my printer might be too heavy for it, but it works perfectly for it and the 4 slots down below are great for paper storage for it. I did notice that one person said that there was backing on this to keep things from flying out the back. This does not come with that. It is open on the ends. I did not attach any pictures, but it looks nice on my desk and seems to be a great product.
Trista
2025-09-02 12:19:46
This is perfect. Well made, easy to construct and gives me more storage space for files and printer paper.
Robin Taylor
2025-08-26 13:18:50
I am super impressed with this stand. I unpacked it, located the “Installation Instructionsâ€, inventoried all items to ensure I had all listed parts, and counted the screws (I had the correct number). I then quickly reviewed the instructions and hints and began the assembly process. I was quickly impressed with how well the pieces went together, and that did not change as assembly progressed. The pre-drilled holes were in the correct places and I had no problem assembling this without assistance. As always, I didn’t fully tighten the screws until I had it mostly assembled. I have assembled much more expensive pieces that did not go together nearly as smoothly.It is a relatively heavy piece and feels very sturdy. As you can see from my pictures, I am using it “upside downâ€. I did this to allow for an additional storage spot for some zippered file holders I want easy access to. The shelf (intended to be the bottom) with the printer on it feels sturdy enough to adequately support it, but I will watch it for a bit to ensure there are no support issues. I have paper and notepads on one side of the storage shelves and small bins holding various other smaller items on the other. I just set it up a few minutes ago, so my utilization of the storage shelves may evolve as I continue reclaiming and reorganizing my desk.Just a note - I did take a minute to read the thank you note from PAG Supermarket that was enclosed - nice touch. It encouraged a “real†product review - and this is one. I purchased this product after doing some looking around for something to suit my needs and have received nothing in return for this review. I would recommend this product without reservation.For reference:-I have an HP OfficeJet Pro 9015 all-in-one.-I am a married 60 year old woman with average “handy†skills.
McMo
2025-08-14 18:42:33
Easy to put together. Fits the HP LaserJet Pro 200 color MFP printer nicely. Provides extra storage for printer paper that is now easily accessible.
C2
2025-07-28 11:01:43
This was easily assembled. The directions are just pictures, but they are easy to understand. It comes with all the hardware necessary to assemble, even a screwdriver, which was helpful. All of the holes were predrilled perfectly and went together well matched. I was concerned that my printer might be too heavy for it, but it works perfectly for it and the 4 slots down below are great for paper storage for it. I did notice that one person said that there was backing on this to keep things from flying out the back. This does not come with that. It is open on the ends. I did not attach any pictures, but it looks nice on my desk and seems to be a great product.
Trista
2025-07-26 14:12:38
This is perfect. Well made, easy to construct and gives me more storage space for files and printer paper.
Robin Taylor
2025-07-22 15:04:47
I am super impressed with this stand. I unpacked it, located the “Installation Instructionsâ€, inventoried all items to ensure I had all listed parts, and counted the screws (I had the correct number). I then quickly reviewed the instructions and hints and began the assembly process. I was quickly impressed with how well the pieces went together, and that did not change as assembly progressed. The pre-drilled holes were in the correct places and I had no problem assembling this without assistance. As always, I didn’t fully tighten the screws until I had it mostly assembled. I have assembled much more expensive pieces that did not go together nearly as smoothly.It is a relatively heavy piece and feels very sturdy. As you can see from my pictures, I am using it “upside downâ€. I did this to allow for an additional storage spot for some zippered file holders I want easy access to. The shelf (intended to be the bottom) with the printer on it feels sturdy enough to adequately support it, but I will watch it for a bit to ensure there are no support issues. I have paper and notepads on one side of the storage shelves and small bins holding various other smaller items on the other. I just set it up a few minutes ago, so my utilization of the storage shelves may evolve as I continue reclaiming and reorganizing my desk.Just a note - I did take a minute to read the thank you note from PAG Supermarket that was enclosed - nice touch. It encouraged a “real†product review - and this is one. I purchased this product after doing some looking around for something to suit my needs and have received nothing in return for this review. I would recommend this product without reservation.For reference:-I have an HP OfficeJet Pro 9015 all-in-one.-I am a married 60 year old woman with average “handy†skills.
McMo
2025-07-20 12:15:04
Easy to put together. Fits the HP LaserJet Pro 200 color MFP printer nicely. Provides extra storage for printer paper that is now easily accessible.
AG
2025-07-02 14:48:18
Well made and designed, however an additional measurement for the top shelf should be provided. The overall length is 20", but because of the way it is designed, the available length for the printer on top is actually 19". The two side boards take up 1/2 inch each. (It will be easier to follow if you look at the attached picture). My printer is 20" in length. Therefore, the only solution was to turn the product upside down and use the bottom shelf to hold the printer.
Kevin Kuechle
2025-06-29 14:48:11
worth every penny, it is sturdy and looks great
rjn
2025-06-18 11:24:13
This stand goes together with 8 screws. There is a back panel for the shelving area, so miscellaneous items will not be flying out the back. The top shelf does not have a backing, and thus will not interfere with a printer cord or other access. The middle shelf and partition slide into place without screws, and could be easily removed if needed for cleaning.The only flaw that I encountered was that one side edge laminate for the top and bottom shelves was apparently applied after the slot for the back panel had been routered, thereby covering the end of the slot and requiring a truly trivial trim to mate correctly with the slots in the vertical boards.The assembled stand has no sag, wiggle or wobble and looks great.
.452
2025-06-17 12:32:06
Three compartments, lower height, sides extend above printer shelf, very sturdy. I recommend. I use carpenters glue on assembled furniture.
Steven Neo
2025-06-09 18:41:29
Item as described. Nice fit for Epson L6270 series with space for papers in the compartments below and room for ink refill bottles by the printer side.
Menaka k.
2025-05-30 12:08:22
The stand is fantastic.The only con I notice is one of the sides is rough and not sanded enough for a smooth finish.otherwise easy to store printer papers and other accessories .
FB
2025-04-30 12:27:42
Easy to build, smooth edges. Does the job!
Firma VMS Wilfried Schmickler
2025-04-25 09:44:09
Super
anupama
2025-04-23 11:09:51
Quality is not so good. Can see small small nails which leads to crack. After usage it got some spots. But serves the purpose .
AG
2025-04-01 13:45:44
Well made and designed, however an additional measurement for the top shelf should be provided. The overall length is 20", but because of the way it is designed, the available length for the printer on top is actually 19". The two side boards take up 1/2 inch each. (It will be easier to follow if you look at the attached picture). My printer is 20" in length. Therefore, the only solution was to turn the product upside down and use the bottom shelf to hold the printer.
Kevin Kuechle
2025-03-20 14:27:40
worth every penny, it is sturdy and looks great
rjn
2025-03-07 18:58:41
This stand goes together with 8 screws. There is a back panel for the shelving area, so miscellaneous items will not be flying out the back. The top shelf does not have a backing, and thus will not interfere with a printer cord or other access. The middle shelf and partition slide into place without screws, and could be easily removed if needed for cleaning.The only flaw that I encountered was that one side edge laminate for the top and bottom shelves was apparently applied after the slot for the back panel had been routered, thereby covering the end of the slot and requiring a truly trivial trim to mate correctly with the slots in the vertical boards.The assembled stand has no sag, wiggle or wobble and looks great.
.452
2025-03-03 18:36:45
Three compartments, lower height, sides extend above printer shelf, very sturdy. I recommend. I use carpenters glue on assembled furniture.
Steven Neo
2025-02-05 13:02:06
Item as described. Nice fit for Epson L6270 series with space for papers in the compartments below and room for ink refill bottles by the printer side.
Menaka k.
2025-02-02 17:08:28
The stand is fantastic.The only con I notice is one of the sides is rough and not sanded enough for a smooth finish.otherwise easy to store printer papers and other accessories .
FB
2025-01-10 19:40:49
Easy to build, smooth edges. Does the job!
Firma VMS Wilfried Schmickler
2025-01-05 11:24:11
Super
anupama
2024-12-25 14:44:58
Quality is not so good. Can see small small nails which leads to crack. After usage it got some spots. But serves the purpose .
Recommended Products