Your cart is empty.
Your cart is empty.Product Description
COKOLATIA 2.4G 4-Channel Remote Control +180 Motors Kits
2.4G 4-Channel Remote Control + 180 Motor for RC Boat
- The 2.4G 4-Channel Remote Control+180 motor kit is suitable for RC boats DIY Model boat Spare Parts.
- 4-way 8-button 2.4G RC kit: including remote control, receiver board and screws 3, suitable for hobbyists or school purchase to make RC car model boat model! Be careful, can't make airplane model!
- It is recommended to use 3V and 2 AA batteries with 1.5V for the remote controller. 130, 260, 180 motors are recommended.
- 180 motor: 3V-6V strong magnetic RC boat motor, Shaft length is 6.5mm, Shaft diameter is 2mm.
Operation Notes:
- 1. Keep the switch of the receiver board and the remote control in the off state, connect the power supply of the receiver board and the motor
- 2. Turn on the receiver board switch, then quickly turn on the remote control switch, the red indicator light on the remote control will flash and then go out, indicating successful pairing. If the red indicator light on the remote control box flashes quickly and then goes out, it means the pairing is successful. If the light flashes but doesn't go out, please wait for a while. Our board in the factory has completed the pairing.
- 3. The maximum output current of the board is 5A, set two acceleration keys in the center.
2.4G Remote Control Kit Specifications:
- Power supply voltage: DC 6V power supply for the receiver board (max. 7.6V), 3V for the remote control, two 1.5V AA batteries.
- Output voltage: 3-7.6V, motor terminal output
- Remote control distance: 50-100 meters
- Receiver board size: 53*42MM, remote control size: 116*89mm
180 Motor Specification:
- Motor model: 180 Strong Magnetic motor
- Shaft length: 6.5mm
- Shaft diameter: 2mm
- Voltage: 3-6V
- Speed:
- 2.4V idling 0.12A;
- 3.4V idling 0.13A speed of 5000 rpm;
- 6V idling 0.18A; 108MM propeller current 1.33A speed 1W
- Size: 31*20*15mm
INCLUDED: 2x180 strong magnetic motor, 2xmotor mount, 2xconnector (10mm), 2x150mm length shaft, 2xD36 propellers, 2x Bottom plate, 4x Metal connectors, 1x pack of screws.
Package list:
1x 2.4G Remote Control Kit
2 x 180 strong magnetic motor (2 x motor mount)
2 x connector (10mm)
2 x 150mm length shaft
2 x D36 propellers(1x cw+1x ccw propeller)
2x Bottom plate
4x Metal connectors
1x pack of screws
Pluh
2025-07-18 18:31:12
Used for a science project. Awesome diy just requires soldering. Would recommend
Customer
2025-03-15 13:03:36
It works though
Joseph S. Ferebee, Jr.
2025-01-09 18:01:30
Little trouble at first, but was able to get it working.
Recommended Products