Your cart is empty.
Your cart is empty.Product Description
BeElion 2CH Color Video Quad Switcher
Basic Function
Real Time Color display by Full-Screen, Two -Screen ,and can be switched to splited by up and down ,or right and left
Package Content
1 x DVR Quad Camera Splitter 1 x Remote control 1 x Manual 1 x Package box
Product Applications
Application for School,Home,Factory,Office Monitoring Picture Segmentation, Full screen display for each channel, Automatic display by turn mode.Switch between NTSC and PAL system. Picture In Picture show ,PIP position switched (top left , top right, bottom left, bottom right corner )
Product Specifications
- * Material Metal, Plastic
- * Power DC 12V
- * Power by 1 x DC 12V 1A Battery(Not included)
- * Video Standard : PAL: 25 frames / sec ; NTSC: 30 frames / sec.
- * Video Input : 4 channel video inputs Peak : 1Vp-p Impedance : 75ohm¸
- * Video output: 1 channel video output peak : 1Vp-p Impedance : 75ohm¸
- * Resolution PAL: 720 x 576 50Hz * NTSC: 720 x 480 60Hz
- * Quad System Size (Approx.) 14.1 x 10 x 2.7cm / 5.5 x 3.9 x 1.1 Inch
Basic Features
* Conenct up to 2 video camera;
* Adjustable brightbess, Contrast, Saturation, Hue and Sharpness;
* Various Display Modes: Ful Screen Mode, PIP Screen Mode, Dual Split Mode and Auto Sequence Mode;
* High performance Freeze Function, flicker free image capture;
* High performance Zoon Function, selectable zoonm area;
* Various Overlay Information: Camera Title, Real Time and Date, Alarm/Loss/Motion Message.
Kroy Tri
2025-06-16 18:23:20
If you need to display two cameras in one TV this is it. I bought a BNC to RCA cable and as long as you set the settings to NTSC not PAL, everything will work. Image quality is good, display options are plenty. Just what I needed.
The Calvary IT
2025-04-15 15:42:50
I wanted it to split screen vertically as pictures description shows, but it only splits horizontal and not representative of cameras being viewed. I think it’s a good value
aecii.3d
2025-03-03 13:22:02
Remote would not control system menu. Buttons would not control system menus. I must have received two defective units. They were both stuck in pal mode. :( Better luck next time maybe.
GURU
2025-02-07 18:10:57
Contacted the seller BeElion, to confirm that the unit would automatically switch/sequence as the description. They stated that it wouldn't do that, that I had to switch them manually. That's not true at all. There is an "Auto" button on the far right of the unit. Just select input 1 or 2 on the front. then press the Auto button. Nothing will change then, but,,,,,,,press and hold the Auto button in for a few seconds and release. Switches/sequences just fine. Fact of the matter is, that in the software of the unit, you can change the sequence time. We set it to 5 seconds for the commercial application of connecting 2 surveillance DVR's and to one large screen TV in an external office for monitoring. We ordered 2 of these and one worked 100%, but the second one, the remote function didn't work. Being in the electronics service business, we did an RF test of the included remote and appeared OK. Either the remote didn't match the unit or the RF receiver within the unit was defective. Not worth the effort of disconnecting from the commercial installation and waiting on a replacement. Would have just upset our client to have one-half of their new system down.
Customer
2025-02-06 14:15:56
Works as advertised.
Customer
2024-12-08 12:50:34
Good product!
Recommended Products