Your cart is empty.
Your cart is empty. Specification：
Capacity error: ±5% (J)
Maximum loss Angle D.F: max0.0007(0.07%)AT 1KHZ
Operating temperature range: -40°C+105°C
Capacity drift (DRFT): Within the operating temperature range, the capacity drift does not exceed 2%
Insulation resistance: I.R:C ≤0.33uF, I.R ≥9000 mega-ohm(AT20°, 1min)
Life test: 150% of the rated working voltage AT1050CFOR is imprinted for 1,000 hours
Humidity test: capacity change is less than 5%, loss angle DF is less than 2%, insulation resistance R. is greater than 70%
(At a humidity of 95% and a temperature of 40°C, 1,000 hours.
Wire tension load: It can withstand at least 1.5KGS/30 minutes at room temperature.
Wire bending load: Folding back and forth at 90° will not break once
Capacitance:4.7uF Package list:
Capacitor * 2 PCS
1
Chris goss
2025-08-27 12:19:01
Cleaned up the noise on my amps output. Soldered them to the inputs of the amp boards drivers and cleaned up the idle hum. Now it’s silent and sounds great.
Ashley
2025-08-21 13:40:43
Exactly what I needed to repair my p.a. system tweeter
Joe
2025-04-24 13:51:55
The sound effects is amazing
Opa
2025-03-17 16:57:04
Removed the old aluminum electrolytic capacitors and soldered these in. Sound quality improved significantly!
Recommended Products
