Shopping Cart

Your cart is empty.

Your cart is empty.

2Pcs Universal Car Shock Absorber Spring Bumper Power Auto Buffers A/B/C/D/E/F Type Spring Bumpers Rubber C+ Type

Free shipping on orders over $29.99

$22.99

$ 11 .99 $11.99

In Stock

1.Size:E Type


About this item

  • Before installation:measure the spring distance (H2) when the car is stationary (no need to use a jack or other tools to lift it). After measuring the data, use a jack to jack up the vehicle to completely relax the spring. Measure the gap between the springs (H2) and select the appropriate size cushion for extra support. Choose Size (C+) of the rubber buffer, if the Car Coil Spring Gap (when lifted and unloaded) is between 1.37''-1.6''
  • Effectively solve problem of springs weakness when heavy load & improve performance of shock absorber.
  • Improve driving comfort and more stable during curve corner.
  • Reduce pumping of absorber when passing through road hump or yellow line.
  • Reduce noise and vibration during traveling.



Product Description

shock absorber
Car Coil Spring Buffer
Car Spring Buffer
Car Spring Buffer
Coil Spring Buffer

Roshannae dougal
2025-08-05 15:11:06
Easy installation, fitted perfectly, ride quality as expected and functions great. Worth the bucks.
you do a good job
2025-07-21 10:18:21
I will say that it help solve my coil overs problem. Mb c320 springs are way smaller than factory springs. The adjustable sway bar link can on be extended so far without coming apart while driving with preload on them. The spacers gave the extra spring stiffness I needed to be able to feel safe driving comfortably. For me my suspension is super stiff but it’s a lot better than feeling like I am driving on hydraulics. FYI you will feel every bit of the road but the faster you go the less you feel the road and all you get is a little shaky steering wheel. Another FYI make sure you get a complete alignment. If your lowered make sure your even all the way around. It’s make a huge difference. I am 25 1/8 in the rear and 24 1/8 in the front. I am on 18x9.5 rear and 18x8.5 front. Tire size make a huge difference too. Front is 215/40/zr18 stretch and 245/40/zr18 rear not stretch. I am giving all this information because at two months on coil overs my suspension is finally tune right. Last FYI if your car is slam in the back no one will align the rear wheels unless you raise it at least one finger above the tire and camber correction will not be done unless you install adjustable camber bars front and back. Hopefully this helps someone.
Customer
2025-06-09 14:02:19
They work good for sagging struts
Jallens33
2025-05-31 18:48:26
I lowered my Mercedes C350 with an Eibach Pro Kit. It was so low in the front it scraped. I jacked the front up, measured, then ordered. When they came in I jacked the front up again. Did not need to remove the rim. Spray the piece with WD40 and slide these on. Zip tie and your done. I used extra zip ties. 5 for each. As long as you use WD40 it's super easy. Took me 20 minutes to do both the front springs. Problem solved. No more scraping or bottoming out. Best cheap fix ever.
karla
2025-05-14 18:47:31
Rubber material don't last long. I only have it for a week on my car and barely driving. Changing my tires I noticed the rubber got hard and really skinny,good thing it's ziptied but not really functioning. Waste of time and money
john
2025-05-08 20:31:24
Installed in rear 2006 Camry 10/8 very easy to install guess I measured correctly. Measured the car height and that stayed exactly the same but my ride quality is way better the rear struts are junk and it was like being in a boat the car was very bouncy before, these got ride of that
RobertW3
2025-04-26 12:17:12
I’ll add photos later but these mofos saved my wallet!!!!! Yo if your lowered and the rear is bottoming out or want to raise it a few mm this is exactly what you need!!! I’ve never lowered a vehicle before, this is my first lowered car done by me, springs only on a 2010 challenger. Love the finished product but I have subs and tools and the rear sag slightly lower than the front no matter what bump I hit before adding the spring spacers you would cringe for the car like damn I felt bad for her. DO NOT TAKE YOUR CAR TO THE SHOP TO HAVE THEM PUT ON!!! They will claim they need to remove everything just to put them on and attempt to charge you about $300 bucks Texas tire gave me this ridiculous quota my primary shop said they won’t fit….. I was determined to have these on before I drove out of town, all I had was a old raggedy a** small jack that didn’t even lift the wheel off the ground at full height…!! With a lotta WD40 and some curse words I finally got both sides on!!!!! Long story I know but I’m a real person I am not a mechanic and all I had was a funky a** jack the will to get the job done and a lotta curse words oh and WD40 haha but hey saved $300 bucks the shops attempted to rob from me so do it yourself!!!! Ask a friend for a old raggedy jack you get pissed off enough you’ll finally get them on lol anyway I really love the way the car feels now!! Absolutely completely different a lot smoother and no more cringe from the rear bounce just feels perfect, stable I definitely recommend!Just buy it
super-chill
2025-04-22 19:46:50
Incredibly hard to get started but once started with slide into with less effort. Use soap to ease installation. Noticably improved ride quality.
Individual
2025-03-11 15:55:19
Put these in my 2023 Sportage SX PHEV and they fit perfect. Raised the back about 3/4 inch and reduced the super soft springs the factory supplies on these vehicles. Drives better and ride height is better. Considering getting another set to add because with passengers in back it's still too soft.
Miguel Angel
2025-02-20 19:08:58
Lo quería para Tsuru 3, para que no se sintiera tanto el camino, baches, hoyos, piedras, todo tipo de imperfecciones que hay en una carretera en mal estado.
walid abdullah
2025-02-09 19:36:48
خدمة التوصيل سيئة
Chandrakant Shitole
2025-01-27 17:21:49
Perfect for Jeep Liberty 2010 rare suspension spring of rod dia 15.3mm. Perfect fit spring in the groove. Type B is perfect for spring rod diameter of 15.3mmBut not enough strength/stiffness, very soft and doesn’t show presence
Adeeb
2024-12-11 13:10:15
This thing is even better than I thought it would be! My car rides so much smoother now.
Recommended Products