Your cart is empty.
Your cart is empty.38mm/1.5in 2 stage fan grounding switches and hose fitting. Activates 2 electric fans at 2 different turn-on temperatures. Sized by the outside diameter of the fittings outer raised lip. Mounts anywhere along the radiator or condenser hose line. Probe measures fluid temps including water, coolant and oil.
CLdvgsTml
2025-08-27 14:03:40
Excellent
Kasaru
2025-07-03 14:33:51
Not wanting to spend the money on getting the PCM tuned, I bought this housing for the 05+ cooling fan retrofit on my 02 Yukon XL. Dunno why the highest temp offered is 210, but it'll work great with a combination of aftermarket condenser fan and transmission cooler fans. For the money, it's pretty great. However, mine did not come with a bolt for the ground. Will have to source that separately. A complete lack of wiring instructions might be frustrating for some too. Depending on the amp rating of these switches, that might change the wiring plans drastically.
dennis burns
2025-06-17 13:55:36
Easy install, small temperature switch problem. Company replaced it no problem.
Stewart N. Swindle
2025-05-10 10:50:36
Works perfectly.
Jonathon Yakel
2025-04-15 09:37:55
Installed this on my 99 silverado that I did a E-fan conversion on and the main body part needed to have some mettal filed out of the inside where they cut the holes for the sensors. The hose clamps they provide 1 do not fit over the hose and 2 are super cheap and would probably strip out before they would be tight enough to seal a radiator hose under pressure. But all in all the two sensors seem to working at the temps that they are supposed too and I'm happy with it.
Dragstar kustoms Inc
2025-03-25 11:03:52
Cause the sensors is a risk of working or not. Still a good buy if you need external cooling information.
Jose
2024-11-28 17:55:51
The Bulbs just working for 3 days
Recommended Products
