Your cart is empty.
Your cart is empty. Product features:
Stem diameter: 8mm.
Stem length: 1″(25mm).
Wheel diameter: 2.95 inch (75mm).
Wheel thickness: 0.98 inch (25mm).
Material: steel and PU.
Wheel Color: Red.
Total height: 4.65 inch (118mm).
Installation height: 3.66 inch (93mm).
360 degrees swivel casters rolling smooth;
safety dual locking locks both the wheels and stem;
heavy duty, load capacity 330lbs per set;
No noise;
Non-marking;
Package includes:
3-Inch wheels (all with brakes)×4
Threaded embedded parts×4
Washers×4
Nuts×4
Wrench×1
Tips:
What does the M8×25mm mean?
It’s the metric unit size, stem diameter is 8mm, threaded stem length is 1″(25mm), make sure the stem size is suitable for your installation before your purchase.
Who chose us?
For DIY workbench, cart wheels, furniture, office chairs, desks, tables, wood, threaded pipe, metal board, suitable for hardwood floors, marble floors, carpet, indoor and outdoor floors.
How to use?
For cart boards and wire racks which with holes, you need insert the bolts into the holes, put the washers on and tighten the nuts; For wooden legs of table and furniture, you need to drill holes and insert the bolts in and then tighten it; Or drill holes, screw in the embedded parts, and then tighten the bolts; For pipes with threaded holes or replace your old furniture casters, make sure the bolt size is match it up with the threaded holes before your purchase.
Sue
2025-09-03 10:01:20
Quality made. Fast shipping. Heavy duty. Purchased to use on a gaming cockpit. Works perfect. Fits perfect and rolls easy. Good value for the money.
Leighana
2025-08-15 17:47:59
Smooth rolling, easy lock, super easy to install. Don't buy if you aren't sure they will fit. Don't buy if you think they will hold your F350 up to roll around the shop. Don't but if you don't like red wheels. Don't buy stuff you don't know how to use
Inez L.
2025-08-06 18:16:38
I ordered these for a table fabrication project I was planning that I recently completed. The table is a lighter weight design than I originally intended, with a base of 36"W x 30"D x 36"H, constructed of well-seasoned, 1-1/2" x 1-1/2" pine stock. The shelf and top are made of 3/4" sanded plywood; top dimensions are 48" W x 42"D. I am pleased to report that the table is both sturdy and stable, with the added weight of the casters adding to the stability. The casters can be installed using the provided bolts, but my design required fastening with 1-1/4" wood screws, which have proved to be quite sufficient for the level of movement the table is subjected to. The casters all feature full rotation and locking levers that are easy to engage/disengage. They have a sturdy appearance and function great on hard flooring and carpeted flooring.
Shannon
2025-06-30 15:23:27
These have tight swivel bearings compared to most others. The wheels are bushing type and they also have tighter tolerance than any others I've used. I got them because the system size is 8mm threaded. For a wire shelf.Bonus, they come with three insert hardware and a wrench! The wrench is handy because it's thin which, allows for adjustment of height once installed. Just buy theseðŸ˜
glow_may
2025-05-19 17:42:14
I use 6 of these on a sim racing rig and they're sturdy enough, but I would say the vertical support is a bit on the flimsy side. Bought them for the color mainly. They do work fine, and I've had NO issues(even fully loaded with 'driver' at about 400lbs total) but would by no means consider these 'industrial' duty. Definitely made with chineseium alloy.Would step up if you are using these on a steel cart with expensive tools/heavy merch on them or on anything used around clients/customers, especially if relying only on 4. Would definitely not want one of these giving up the ghost if someone's kid was climbing on a rack.
Nan
2025-04-22 14:49:00
I looked for wheels at our hardware store and they were $30 (and were wrong size). I’m so glad I found these to put on the legs of an IKEA desk. They fit perfectly and work great!
Robert S.
2025-02-16 15:23:17
The original casters that came with my mechanic creeper wheels over time wore and made it difficult to move. Switched out with these that are a bit smaller, but much harder. Works great! Great product!
Liam
2025-02-08 13:33:40
I bought these 3-inch M8-1.25 threaded casters to replace the smaller ones on my adjustable overbed table. The difference has been night and day. These larger wheels have completely transformed the table's mobility, allowing it to roll effortlessly, even when fully loaded with items.Installation was a breeze, as the M8-1.25 thread size matched perfectly with the table legs. The build quality of the casters seems robust, suggesting they'll last a long time.For those facing similar issues with underperforming wheels on furniture or equipment, these casters are a solid investment. Just make sure the thread size matches your needs, and you'll be set for a much smoother experience.
Mainducks
2025-01-07 16:40:42
Bought these for my Jerker Desk and Filing unit. This desk from Ikea is steel and if you want to move it you need two people, I always put stuff like this on wheels so I can move it where I want it. Pay attention Ikea provide people who buy your stuff with options for castors, especially if the item requires two people to move it around.
Delroy
2025-01-05 13:03:01
Using these to replace the standard feet that are on my customized IKEA Jerker desk. It is a heavy with all the stuff on it and need to be able to move it around a bit when adding wiring and such. Look very well built and should hold just fine over the years.
Howard C H Wong
2024-11-30 13:38:54
Terrific 3" heavy duty casters installed on my racket Stringing machine. Now enables me to move the machine when cleaning. Brakes work fantastic. Rated as 4 stars because I cannot yet comment on long term durability (been installed for only 2 weeks). Would easily be updated to five star product if it lasts 5-10 years (as i don't frequently move the machine beyond a few feet to clean the floors and then back).
Recommended Products
$39.95
$ 18 .99 $18.99