Your cart is empty.
Your cart is empty.Customer
September 6, 2025
Well made unions; seem to be of nylon composite and in a very small form factor. I purchased due to the price against Parker/Legris. They are rated less @ 120psi but as I was using for an RO water system (~90psi) so that wasn't an issue.No leaks and worked great the first time. I would buy again.Note: If you are new to PTC type fittings it is inperative to use a proper tubing cutter on the lines. These types of fittings require a square, non-deformed cut to seal correctly and to not leak. If you use pliers, cutters or shears you are going to have a problem.
Calvary Relief
July 20, 2025
I have air bags in both of my trucks and from time to time I do something that causes a leak. These things work great to splice the lines.
radiowave911
July 12, 2025
I have an air compressor in the shed outside my shop. I have it plumbed in so the tank from my previous compressor is attached giving me extra air volume. I have an automatic drain solenoid to drain the condensate out of the tanks. I needed this Y connector to combine the tubes from each tank to a single tube to connect to the solenoid input. I have had zero issues since installing this. Roughly once an hour, the drain solenoid opens for about 15 seconds or so, limiting moisture buildup in the tanks - and the rust that comes along with the moisture. When I added a drain to the manifold the two tanks are connected to for the air supply, I used another of these Y connectors to add that 3rd line. I now have the two tanks connected to a Y, that Y is one leg of a second Y with the new drain being the other leg. The common from the second Y now feeds the drain solenoid. Still working perfectly at full tank pressure (unregulated). Since I had to buy a multi-pack, I have no idea what I will use the rest for. I am sure I can come up with something.
Chad De Los Santos
May 30, 2025
Had a flat tire and one of my air lines got cut. I was unable to raise up my car and had to get it towed. Bought an air line cutter and a pack of these 1/4 push to connect couplers. Cut outside of where my air line was cut, connected the end pieces and boom, I was back up and running. My only regret was not having this piece before I got my flat tire. It’s a great product.
Customer
May 18, 2025
Good product. Used product for installing air horns and air ride seat on medium size trucks. Thank you.
James Fletcher
December 19, 2024
After installing and doing a 24 hr pressure test this splice fitting did not leak.
Customer
December 14, 2024
Air bags on transit van melted line on test drive on exhaust, worked perfectly, now I have some spares for the road
Customer
November 27, 2024
Look like good quality.
Recommended Products
