Your cart is empty.
Your cart is empty. DERPIPE quick connect fittings are mainly used for quick connector piping, which can achieve line connected or disconnected without other tools easily.This tube connector is available in various styles and models, each model to serve its purpose. All models of push lock fittings are designed to suit your pneumatic piping needs perfectly.
You can easily change the tubing connector direction. Narrow space is also suitable with the push.Quick Connect Fittings are widely used in industries automatic production equipment like machinery, electronics, automobile, packaging and medical.
CAUTIONS:
1.Please do not use it for purposes other than fluids.
2.Please do not exceed the maximum use pressure when using.
3.After the pipe is connected and installed, pull the pipe to make sure that the pipe cannot pull out the joint.
4.Do not use outside the service temperature range to prevent deformation of the sealing material and easy leakage.
5.Do not use it in places where metal powder or sand dust is mixed, such as adhesion of other materials may cause poor work or leakage.
6.When inserting the pipe, it must be inserted into the bottom of the joint. Failure to insert the pipe into the bottom may lead to air leakage.
7.Make sure that the cutting surface of the pipe is vertical, there is no scar on the outer circumference of the pipe and the pipe is not oval.
James
2025-08-21 12:44:15
Easy application sturdy design very satisfied.
Bradley W Bush
2025-08-16 14:49:12
Used for some pneumatic fittings with plastic lines. Cheap and cheerful! Good quality and attractive price. Can't say better than that.
Customer
2025-08-11 13:07:23
Not bad for the price. I had one quick attachment ring pop off but it clicked right back into place and gave me no trouble.
Travis D.
2025-07-22 12:17:18
I used these fittings for a water methanol setup I made for my car. They work perfect, and no leaks so far (80 psi, about 5k miles)
Denner Araujo
2025-06-02 18:49:34
Good quality, great price.
Randy
2025-05-08 15:18:29
Great product as advertised fast shipping
Gary C.
2025-04-12 13:43:09
Good job
A real Customer
2025-03-16 12:51:25
works well for making a quick temporary line but they don't last forever
Salam Gabran
2025-02-07 13:34:28
works as expected
Neil
2025-02-06 14:45:22
So I've got these fittings in use for a couple of things -- first is a low pressure air line for a laser cutter, and second is on dry-boxes used for 3D printer filament. The fittings are well done, good thread cuts, and the barbs for holding the low pressure air or other tubing work well. Good value for a part that isn't stocked everywhere.
Darcy L. Mclennan
2025-01-07 12:59:59
Liked the quality for the price I used 5 or 6 and not a one was defective A++
Salam Gabran
2024-12-29 14:46:21
works as expected
shawn an Samantha
2024-12-20 12:37:29
Great
Recommended Products
