Your cart is empty.
Your cart is empty.Product Description
Feature:
- Made of high quality metail,strong and durable.
- Can safely remove the frozen hub assembly without damaging other suspension components.
- And needn't to strike the hub with a hammer.
Package include:
- 1 x Hub Remover Plate (40110)
- 2 x Washer (40080)
- 1 x Screw Assembly (43670)
- 1 x Threaded Insert (40090)
Specification：
- Type: Premium 40100 Hub Remover
- Color: Black
- Material: Special carbon steel.Easy to use.
- Advantage: No adjustment required and durable.
INSTALLATION INSTRUCTIONS
STEP1:
Remove all bolts and nuts from the axle.
STEP2:
Insert the threaded block and screw.
STEP3:
Secure the hub removal plate to the studs using the provided washers and lug nuts.
STEP4:
Drive the screw to push against a soliosurface to loosen the hub assemblv.
nick sandor
2025-08-18 16:43:46
Made removing seized hub bearing easy.
Customer
2025-05-20 17:34:34
Best thing ever.Seriously, the best.I've bought so many different varieties to remove hub assemblies.And this is it.This is the most effective and universal one i have found.No hammers or heat needed.Grease the thread real good before use. And your golden. I live in the "rust belt". And hitting it harder with a hammer doesn't cut it. This makes it EASY!
Terrance Simmons
2025-05-11 16:50:56
This make getting hub bearing so much easy should got this a long time
steve
2025-04-17 10:55:35
Worked perfectly....didn't have to fight on old hub assemblies to get them out....went so much faster....recommend for anyone doing hubs....one or more
Steel414
2025-04-07 12:52:44
Really made short work of my rusted in wheel bearing assembly hub. No more heating, hammering & prying for hours on stubborn seized hubs.
Doug Hargis
2025-03-12 13:40:56
I didn’t have any problems with it and it removed the wheel hub very easily
LLB
2025-02-05 16:34:23
I replaced both front wheel bearings in my 2018 Subaru Outback. The first wheel bearing was seized so bad that I pounded all day and finally got it loose with heat and serious pounding. After that horrendous experience, I ordered this remover before even attempting the other side. Using a little heat, WD-40, and this remover, the bearing was out in just under 10 minutes. The entire process start to finish took about 40 minutes using this tool. With this tool in my arsenal, I'm no longer afraid to tackle the rear bearings when the time comes. Suggestion: If it looks like the lugs might separate from the hub, change your angle of attack on the knuckle until the hub breaks loose. For me, 11 o'clock, and 5 o'clock on the knuckle were the sweet spots.
jaydee
2025-01-13 11:45:40
Just what I needed - saved me a lot of headaches & time thank you
Recommended Products
$566.41
$ 99 .00 $99.00
$57.99
$ 28 .99 $28.99