Your cart is empty.
Your cart is empty.Product Description
Michael R.
2025-08-28 09:08:54
Reduces mess Easy to use pack's bearings.Pretty good.
MomentaryPaws
2025-08-25 14:01:42
Product is well made and works as it should. A real time saver. Highly recommend.
Jeffrey Spicher
2025-08-17 12:17:40
Easy to use. Packed 4 bearings in about 2 minutes. Highly recommend.
Josh
2025-07-26 12:06:40
Makes servicing bearings much easier
Tom
2025-07-02 18:03:34
The bearing packer works well until I had to try and refill it with grease. It's almost impossible to remove the center portion to add more grease. It creates a suction. So strong, stronger than 5 gallon buckets stuck together. I eventually used compressed air to pop the center portion back out. Then when I refilled it most of the grease that I put back in, it ended up purging back out because there was trapped air bubbles. One-Time use. Only sure go for it. If you plan on using it multiple times when you need to add grease, it's not worth it. Save your money.And yes I did watch the video on how they say to refill it with Grease. They definitely have some strange sorcery going on there.Oh I almost forgot. It comes with some pretty cool stickers that are pretty high quality.
stevef
2025-05-31 11:17:55
My new Kraken packer came dry, so the bearing plate with o-ring was stuck in the tub and wouldn't pull out as it was. It came with a sticker that said to push down on the plate to unstick the o-ring and get some oil on it, but that didn't work because the tub was dry...no oil in it. So if you buy one of these and can't get the plate out like me, here's how I finally got the plate to come out. Initially, I took the threaded center post out by removing the bottom nut. I added oil through the bottom hole in the tub, rotated the tub to distribute the oil around the inner wall of the tub, pushed the plate down to get oil on the o-ring and wiped oil on the tub wall above the plate. With that lubrication, I was able to pull it out with the needle nose pliers. Thinking about it further, I realize now that I didn't need to remove the center post. Instead, just pour some oil through the holes in the bearing holder plate to the get the oil under the plate into the bottom of the tub. Then rotate the tub to coat the lower inner walls of the tub. Then push the plate down to get oil on the o-ring, and it should come out then. I'm using the tool today and now that it's lubed and full of wheel bearing grease, it is working well and easily. It might have just been the one I got, but if you get one like the one I got, where the plate won't come out easily or at all, this should help you. Deducted a star for having to deal with the stuck bearing plate. Also, I was going to clean it out, and sprayed some parts cleaner spray on it, and the plastic tub started melting. Fortunately, I noticed before too much damage was done and didn't ruin it. So, never use parts cleaner spray on this tool.
Mikeb
2025-05-28 16:06:25
Took awhile to get a rythem going, but wow. I also learned that in refilling, a gently inserted lag screw easily pulls the plunger. This is quality construction, extremely efficient and easy to pack bearings. A little pricy, but I did 8 bearings in less than 20 min. You need one of these!
Christine
2025-04-20 12:02:28
After braking two (2) bearing packers that require pushing a plunger to get grease into the bearing, and then they both broke. I bought the KRAKEN bearing packer.It works by simply twisting the handle and in seconds the bearing is packed with grease.Do waste your time or money on the cheaper bearing packers like I did, get the KRAKEN bearing packer it's great.
oscar alejandro marquez amador
2025-03-18 18:06:34
el uso muy facil , aunque modificaria un poco el diseño, ya que cuando se acaba la grasa es muy dificil sacar el fondo para rellenar
janik
2024-12-27 13:04:30
does exactly what supposed to should of bought this earlier
Recommended Products