Your cart is empty.
Your cart is empty.
Using: Stick on the bow
Material: Stainless Steel
Model: Left / Right Hand
Size:3.5 x 1.8 CM
Thickness: 2 MM
Using Recurve Bow
Special: Magnetic
Package: 4 x Black Arrow Rest
perruptor
2025-09-03 10:37:08
A quality product. All-metal construction means I was able to bend the base (using tools) so it closely fit the curve on my black hunter bow. The wire support flicks out of the way easily when the arrow fletching passes, then the magnet pulls it back into place. The adhesive pad grips firmly. Cheaper than what's available on T*mu, and I didn't have to wait.
Manofgod
2025-08-14 14:34:42
I bought these because the plastic one I bought broke first shot. And these lived up to task and didn’t break. What it did do was rip the feather off my arrow first shot. Arrows I had been firing from felt no problem. So yes it’s durable but don’t use feathered arrows. I was so mad I didn’t even try my plastic vain arrows. Another thing: This may be different for your bow but on my recurve bow it did not fit fully. Lining up the hole meant part of it was sticking off the back of the bow. So I moved it forward a bit. I don’t think it’s a bad design. I just wasn’t expecting those results and should have planned accordingly.
Patrick T.
2025-08-05 10:39:30
Excellent choice for minimalist approach to traditional archery as an arrow rest. Used for instinctive shooting method. Spring back action to wire arrow rest magnet helps maintain alignment for successive hold and release of shots.
Melvyn N. Naidas
2025-06-11 10:05:46
Easy to place on bow. Not expensive. Delivered quickly. The actual wire rest is kind of short/small. I use Easton aluminum 1816 and 1916 arrows and they stay put, so no functional issues. If you want simple and inexpensive, use these.
John A Duvenez
2025-06-01 14:33:17
I have placed these wire rests on three of my bows. The only corrction I made was to bend the straight wire upward 1mm at the tip to allow the arrow to rest without slipping off the rest while drawing the arrow. Other than that they work really well with the magnetic return hold. I am really pleased with these very clever devices.
Jason A.
2025-04-30 15:04:16
I am not happy with this arrow rest. Two out of the four in the package or bent and required tools to get them flattened back out. Once I install them, I noticed that the silver pin that serves as a pivot point for the wire protrudes out pretty far and interferes with the arrow alignment. The wire rest could be a little longer and it needs a small bend at the tip because the arrow just barely holds on without falling. When the arrow is released and it folds away, the back portion of the wire rotates directly into the path of the fletching and is catching and tearing on the vanes of the arrows and really affecting the flight characteristic. As far as I'm concerned these are not usable at all. I'm better off just perching the arrows on the shelf of the riser.
Texas Coyote
2025-02-18 14:39:30
Installed today on my Samick Sage I have had for 3 years. Went out and shot the tightest 5 arrow group I have ever shot to date. They work wonderfully! ( Mind you I just target shoot, so not sure how well they would perform under hunting conditions )
NoVA Music Lover
2025-01-25 15:00:50
The positive: the 3M adhesive pads worked great. I prepped the riser by cleaning the surface with alcohol and the rest mounted very easily.The issue I had with the rests is that the metal arm sits too low relative to the plunger button and moving the rest upwards impinges on the body of the plunger. I was able to make it work by dremaling out the hole a bit but one shouldn’t have to do that.It worked after a fashion but I wasted a couple of the rests trying to adjust it so it worked properly.
Recommended Products
