Your cart is empty.
Your cart is empty.Product Description
Carlos
2025-08-25 12:33:57
Everything is excellent, the instructions are very detailed, the best thing is that a single person can put it together, I only had problems when putting the gasket, that's why I helped myself with the tape, from then on it's excellent
D J Chigin Sr.
2025-07-30 13:16:54
Amazing mixer I mixed concrete mix and added some sand it was easy to put together easy to clean and easy to move awesome product thank you.
Customer
2025-06-25 14:16:42
Have used this mixer three times so far. I recommend that you don't overstress the unit by trying to put too many bags of mix in at once. Keep it wet. Add water to the drum before putting any mix in first to keep from causing unmixed lumps. We added concrete mix by the shovelful instead of dumping bags in all at once. Less stress on system and mixes much better. Also easier on the back.The assembly instructions were ok for the most part but a few key items are left out and the photos fail to show which way certain items need to be inserted. Also would be helpful if the rubber gasket was already attached to the drum. Watch the assembly video online. Much more helpful that written instructions.Otherwise the unit runs fine and does a good job.
Robert Nunley
2025-03-21 16:32:21
I did not receive leather washers for the inside of the barrel. Just had to put it together without the washers. The assembly instructions did not mention anything about putting the rubber gasket in between the two barrel halves. Missing flat washers and lock washers for the barrel assembly. Instructions say to remove a U shaped bracket to release the spring once the control arm is assembled. There was no U-shaped bracket in the packaging. Instruction say to line up the keyway when mounting the motor. It’s a flat spot not a keyway. There is a difference. I had to take a grinder and grind off the perfectly round shaft to make a flat spot.10-24-2024 Follow up!!!!!I mixed 340 bags of concrete with this mixer. Worked great.
Shane Bryan
2025-03-05 13:05:25
The instructions stink typical Chinese crap, but use common sence putting it together and dont tighten anything until your done. I had to redo things several times but it seems to work just fine. Haven't put mix in it yet.
ryan
2025-02-08 11:45:58
I got this thing at quality was a concern already. Started project, it quit on me 1.5 bags into pour. So I tell the seller I want return it, it didn't even last 2 bags of mixing and broke. They made me send it back after a few days of trying get me keep it. I spend 155 dollars to ship it back and then they just refunded my purchase price. So im out 155 to ship back a hunk of garbage and technically the 30 dollars to ship to me. 185 in total and nothing to show for it but a huge headache. Single worst Amazon purchase I have ever made.
Steven S.
2025-01-31 19:27:32
I'm pretty surprised. Assembly instruction could have been clearer. When they say "leather" it appears they mean rubber. All good. An ounce of thought and you can figure it out. Nuts and bolts are sequenced in packages with the instructions so just start with A. I was mixing 3 - 60 pound bags of ready mix at a time and occasionally 4 if I got it too wet. It chugged right along. Got a few dry spots that stuck to the bottom while mixing but just shut it down and knocked them loose and went right back to it. Mixed about 120 bags and it didn't have a problem. It's light enough, but a little awkward, to move around (I put a strap on it and carried it around under a tractor bucket). It's a bit short for the average wheelbarrow so I put it up on a pallet and it worked fine. Quite surprised it has done so well. I'm bad about writing reviews but this one deserved one!
Dan Thomas
2025-01-20 13:22:14
My old Harbor Freight mixer died, so I sent for this one. It arrived quickly, was fairly easy to assemble, but man, the missing parts... nuts, bolts, leather or rubber gaskets were all missing! I used it for the first time and it mixes 2 bags of 80 pound sakrete very well, but man the motor heats up badly. The motor case definitely needs vents in the case to allow heat to escape! 4 stars
Recommended Products