Your cart is empty.
Your cart is empty.Unitary LDPE Wide Mouth Unitary Wash Bottle 500mL / 16.9 Fluid Ounces. QTY 1 3.3 in L x 3.3 in W ( NOT including Spout) x 6.72 in H 3.3 in L x 4.67 in W ( Including Spout) x 6.72 in H Bottle Opening OD 1.45 In Bottle Opening ID 1.17 In Cap OD 1.65 in wide Cap ID 1.31 in wide
Angie's Husband
2025-09-04 20:19:19
Fantastic squeeze bottle for applying the contents in a precise way.There is a channel embedded in the inside of the bottle, so there is no need for a "straw" to get to the bottom of the bottle. It is a very elegant design.If you want a great squeeze bottle for precision rinsing or other applications, this is the one to buy and you will not be disappointed!
Brandi Segraves
2025-08-29 11:12:37
I use this bottle to hold lacquer thinner for cleaning paint guns. Very handy with the top spout to aim it where needed with just a slight squeeze of the bottle. Doesn’t leak when setting on the bench. Great value for the size.
S. P. E.
2025-08-16 15:57:36
We use this with liquid oil to fill liquid oil candles at our church. The spout helps reach in the top and the squeeze pour is easy to use.
Jim Karan
2025-03-10 17:15:01
There's not much to say about a washdown bottle; you squeeze it, and liquid comes out. If you've used one in the past, then this one will hold no surprises for you. I use mine when I'm mixing up and applying friction polish to furniture, and it has worked very well for me.For those that haven't used a washdown bottle in the past, be careful to leave the cap slightly loose when storing liquids for long periods of time. This bottle has a built-in straw that goes to the bottom of the bottle. As the air pressure outside changes relative to the pressure in the bottle, the air in the bottle may push liquid out all over the place. I store my finish in the bottle as I use it day after day, but since my shop doesn't have HVAC, the interior temperature changes from day to night by quite a bit... and has left me with a sticky mess across my workbench more than once. Leave the cap a little loose and the air pressure will equalize, preventing messes.
Stephen Tashiro
2025-02-14 10:34:40
This is relatively soft wash bottle with no graduations marked on its sides. It's about 6 3/4 inches tall and 3 inches in diameter. For some reason, it is Amazon's policy not to let you buy more than 1 per order. (You'll note that if you try to order a quantity of 2, the web page will change the quantity back to 1 when you continue.) [Edit: A comment to this review explains that this happened because the seller only had 1 in stock at the time of my order.] I find the bottle a useful aid in watercolor and acrylic painting.
Roy G
2025-02-07 16:29:48
This bottle was perfect for my application. I use it in my electronics lab to dispense water and moisten the sponges on my solder/desolder work station.
Scott Robinson
2025-01-29 18:51:53
These are great and work well but after 20-30 uses the top seal threads become worn and don't work well and you get leakage. We use plummers tape to fix the issue.
Shadowcatcher
2025-01-13 11:52:09
Works as designed.Put liquid in, squeeze bottle, liquid shoots out in a concentrated stream.Given that it is made from Nalgene it should hold up.
Recommended Products
