Your cart is empty.
Your cart is empty.Product Description
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
From the Manufacturer
A bushing, is an independent plain bearing that is inserted into a housing to provide a bearing surface for rotary applications; this is the most common form of a plain bearing. The difference between the three types is that a solid sleeved bushing is solid all the way around, a split bushing has a cut along its length, and a clenched bearing is similar to a split bushing but with a clench across the cut. A flanged bushing is a sleeve bushing with a flange at one end extending radially outward from the OD.
Customer
2025-06-07 12:31:38
Used to thread wire through cabinet for under cabinet lighting. Work well.
Quinn D
2025-04-19 12:59:02
I had to return this based on the size. However the item was rebought by the same company as the quality was good.
Tim
2025-04-07 14:53:15
Good product
Anthony W Tucker
2025-03-30 14:07:40
good business!
Rickey M. Horwitz
2025-03-12 12:56:27
Forget what the picture looks like. the length of this piece of crap is 9.35 mm or .368" long. The OD is .555 " or 14.14mm. It was a waste of money,
Justin L
2025-01-28 18:20:25
Works fine. Picture is not an accurate representation of the dimensions so do not only by the picture, please.
Customer
2025-01-20 13:06:03
Bushings
STARS
2025-01-05 21:11:41
Replaced worn plastic wheels, and the bushing between metal caddy frame and each wheel. Axle is 3/8" steel rod. New wheels are roller blade wheels, with flanged bearings replacing the stock bearings (different bores). These nylon bushings work well for my use, with the bushing flange to the frame and the barrel neatly against the wheel bearing inner race.The reviewer point to the black bushing drawing was useful in my buy decision-thanks. In my lot, most measurements are close to drawing, but some slight variations are noted. Sample bushing measurements from my lot, in mm. ID mildly snug on the rod, 9+, with no reeming needed for my use. Flange OD 24+, barrel OD 14-. Flange thickness is 3, barrel length is 6, for a total bushing length of 9. Under a hand magnifier they appear to have been 3D printed and buffed, and the variations seem consistent with 3D renderings.
Recommended Products
